Surfaces的例句大全

All specimens were ground and polished to simulate clinical conditions. Then six specimens of each alloy were selected randomly and coated with a thickness of 2.5 μ m titanium nitride coating ( TiN) on the surfaces by multi arc technique.

随机选择Ni-Cr、Co-Cr合金试件各6个，采用多弧离子镀法分别在其表面上沉积一层厚为2.5μm的氮化钛涂层（TiN）形成TiN/Ni-Cr、TiN/Co-Cr复合体。

Laser pulses melt the metal surfaces and activate nitrogen, inducing nitriding reaction in liquid phase.

激光的作用使得金属表面熔化和氮气激活，导致液相氮化反应；

Then, using these methods, and the property that C-Bezier can exact reproduction of conicoid, this paper extend C-Bezier surfaces to engineering surfaces.

最后，利用分割和拼接技术，结合C-Bezier曲面能够精确表示二次曲面的特性，将C-Bezier曲面推广到常见的工程曲面上。

Experiments on polished clean electrodes show that the arc run velocities after the second run are all of the same order and are independent of whether the electrode surfaces are clean or oxidized.

实验结果还表明，二次后的各次跑弧速度均有相同的数量级，且与电极清洁或氧化等原始条件无关。

Influence of B Refinement on Mechanical Properties and Fracture Surfaces of Hypoeutectic Al-Si Alloy

B细化处理对亚共晶铝硅合金力学性能和断口形貌的影响

On the Fe ( 111) and Fe ( 100) surfaces, when the coverage is below 1/ 2 ML, the coverage effect on CO adsorption can be neglectable.

在Fe（111）和Fe（100）面上，当覆盖度小于1/2ML，覆盖度对CO的影响可以忽略不计。

Analysis of Electriferous Effect on the Metallic Shell Surfaces for Electric Equipment

电气设备外壳带电原因分析及对策

The fairing of curves and surfaces is one of tasks in CAGD and is used to aviation, space navigation, automobile and shipping, so people very attach importance to it.

曲线、曲面光顺是CAGD中的重要研究课题之一，在航空、宇航、汽车和船舶等设计制造行业中有着重要的应用，因此受到人们的普遍重视。

3D Reconstruction of Convex Surface and Two Types of Saddle Surfaces Based on a Single Image

用单幅图像重建三维凸面和两类鞍面的方法

Novel proximity eddy current sensor array and its testing system are developed to realize the real-time inspection of the small gaps between large curved surfaces.

介绍了一种采用柔性印刷电路板工艺制作的新型接近式电涡流传感器阵列及其测试系统，以实现大面积曲面间微小间隙的实时监测。

For the purpose of real-time position inspection of components with large curved metallic surfaces by using a flat flexible eddy current sensor array, the measurement technology is investigated and the testing method based on time division multiplexing ( TDM) technology is introduced for the eddy current array.

针对采用扁平柔性电涡流传感器阵列实现大面积金属曲面部件位置实时监测，对电涡流传感器的阵列测试技术进行了研究。

Fractal Description of Thermal Contact Resistance between Rough Surfaces

粗糙表面接触热阻的分形描述

Through analysing the micro-features and the contact deformation of the machined surfaces, a theoretical algorithm for computing the multi-point thermal contact resistance is developed.

在分析机械加工表面微观形状和接触变形的基础上，推出了计算多点接触热阻的理论算法；

The change of temperature in the dam is big, and except for the dam crest is free, the other three surfaces are restraint by base rock, and so, the big thermal stress in arch dam probably occurs.

除了坝顶为自由边界外，其他三面都受到基岩的约束，温度变形受到的约束比较大，因此在坝体内出现较大的温度应力。

Numerical Simulation on Thermal Radiation of Low Emissivity Glass Surfaces

低辐射率玻璃表面热辐射的数值模拟

Solar selective coatings absorb most solar radiation while simultaneously suppressing the thermal emittance loss from coating surfaces.

太阳能选择性吸收涂层将大部分的太阳能都利用起来，而且同时减少涂层中的热损失。

A method of test and calculation is proposed for mass and thermal migration coefficients on the surfaces of several nonwoven materials.

本文提出了一种试验方法和计算途径，对几种非织造纤维材料在水分蒸发状态下，可获得其表面的传质系数和传热系数。

Surface Analysis on Different Temperature Thermal Oxidation Titanium Implant Surfaces

不同温度热氧化处理钛种植体表面分析

The results of the test applying this technique to cold surfaces show that the surfaces of cold radiant panels and low temperature air supply outlets will produce little condensation under any conditions. THERMAL ANALYSIS OF RADIATOR COOLING PLATE

将这种超疏水表面技术应用于空调冷表面的实验结果表明，无论条件如何苛刻，冷辐射板和送风口表面均不会凝露。辐射器冷屏辐射热分析

The Influence of Underlying Surfaces on Thermal Regime in Permafrost Regions

不同下垫面对多年冻土浅层热状况的影响分析