contact angle的例句大全

The contact angle of the hydrophilic coating is measured by the Contact Angle Tester of JLC, and the quality of water film on the hydrophilic coating is observed.

用JLC型润湿角测量仪测定了亲水涂层与水的接触角，观察了亲水箔经自来水淋洗后形成水膜的情况。

The lotus-leaf-like structure is an ideal structure for the fabrication of superhydrophobic surface with a low contact angle hysteresis.

这种类荷叶状结构是构造仿生滚动超疏水性表面的最理想结构。

DL-10 and D-50 as backflow aids, for which the most important performance property is small amount and low rate of adsorption and high contact angle on the coal surfaces, and weak wettability of these surfaces, besides of high interfacial activity;

所选助排剂为DL10和D50，对助排剂的要求除界面活性高外，更重要的是在煤样表面吸附量小，吸附速率小，接触角大，不易润湿煤基质表面；

The study of hydrophilic-to-hydrophobic transition of temperature-sensitive microgel by contact angle measurement

接触角法研究温敏性微凝胶相变前后的亲疏水性

The hydrophilic-to-hydrophobic transition of poly ( N-isopropyl acrylamide)( PNIPAM) microgel was studied using a Video based contact angle measuring device.

采用光学视频接触角测量仪研究了聚（N-异丙基丙烯酰胺）（PNIPAM）微凝胶在相转变前后的亲疏水性变化。

The scanning electron microscopy ( SEM) images of the surface morphology of the films showed that the surfaces exhibited nest-like and micro nano-structures. The surfaces showed super-hydrophobicity with a contact angle ( CA) of 158.1 °.

SEM照片表明，薄膜具有鸟巢状多孔微纳米复合微观结构，与水的接触角可达158.1°，表现出良好的超疏水性。

Factors that effect the preciseness of contact angle measurement are the roughness of the solid surface. The change of temperature and equilibrium time effect the contact angle slightly.

影响接触角法测定准确的主要因素为表面粗糙度，此外温度变化及平衡时间对接触角也略有影响。

Assuming laminar flow, using the volume of fluid ( VOF) model, setting gas-liquid two phases, specify the inter-phase interaction with surface tension and the contact angle between the liquid and wall.

采用层流假设，应用VOF模型，定义气液两相，设置两相间表面张力及液相与壁面的接触角。

The rate of bubble deformation and the contact angle increase as the electric field strength increases.

随着场强的增加，汽泡变形量加剧，汽泡与壁面的接触角逐渐变大。

The interface phase thickness for liquid paraffin-water system is 9.5? μ m, and the contact angle between the interface and wall is 36.97 °.

实验测得静置的液体石蜡-水体系的界面相厚度为9.5μm，界面与器壁的接触角为36.97°；

After staying in a closed circumstance at 80 ℃ and 95% RH, the films had approximately constant transmission and contact angle.

在80℃和95%RH的封闭环境中静置336h，膜层的透过率、接触角基本不变。

The results show that TiO 2 crystal type and specific surface area of the membrane are the important factors affecting the hydrophilicity of the photocatalytic antifogging membrane. The water contact angle is decreased with increasing the specific surface area and the content of anatase.

结果表明，光催化抗雾膜的亲水性受控于TiO2的晶型和膜比表面，大比表面和高锐钛矿含量可降低膜对水的接触角。

Contact angle and XPS were employed to evaluate grafting effects.

并通过接触角、XPS等方法对接枝效果进行检测。

Some performance indexes such as surface contact angle, molecular weight, crosslinkage, tensile strength and break elongation etc. were investigated.

对EB辐照薄膜的某些性能指标，如表面接触角、分子量、交联度及拉伸强度、断裂伸长率等进行了测试。

Measuring Surface Free Enthalpy Change of Sediment of Chang Jiang River with Contact Angle Method

粉体接触角法快速测定长江口沉积物的表面自由焓变

By this system, environment temperature and humidity, cold surface temperature and contact angle can be adjusted for observing frost growth at different circumstance.

通过这套系统，可以调整环境温度湿度，冷表面的温度以及表面接触角，来研究不同条件下霜层的生长状况。

The success of the assembly of the hybrid film was confirmed by UV-vis, X-ray photoelectron spectroscopy ( XPS), atomic force microscope ( AFM) and contact angle.

运用紫外可见光谱、X射线光电子能谱、原子力显微镜和接触角等表征手段验证了层层组装的成功。

The FTE SAMs was characterized by the time-of-flight secondary ion mass spectrometer ( TOF-SIMS), atomic force microscopy ( AFM) and contact angle measurement, and the tribology properties of the FTE SAMs were measured by the Olympus head/ disk interface reliability measurement system.

应用时间飞行二次离子质谱仪（TOF-SIMS）、原子力显微镜（AFM）和接触角测量仪对FTE自组装膜进行表征。通过Olympus磁头磁盘界面可靠性测试系统对FTE自组装膜的摩擦学性能进行研究。

Simulate the water film formation conditions at the time of tillage parts touching soil, tested the optimal combination of etching Plowshare Steel surface contact angle.

模拟耕作时触土部件形成的水膜条件，测试了刻蚀的最优组合的犁铧钢表面的接触角。

Wettability is one of the important properties of solid surface, usually characterized by contact angle of liquid on solid surface when three-phase equilibrium.

润湿性是固体表面的重要性质之一，通常由液体在固体表面三相平衡时的接触角来表征。