corner radius的例句大全

Corner radius for preventing the chipping in high speed machining.

刀尖圆弧可避免高速加工时刀尖损坏.

Application of Tool Corner Radius Compensation in NC Turning

刀尖圆弧半径补偿在数控车削中的应用

The Influence of Cutting Corner Radius on the Cutting Process of Numerical Analysis

数控车削刀具圆弧半径对切削过程影响的数值分析

Influence of Cutting Corner Radius on the Metal Cutting Process

硬质合金可转位刀片刀尖圆弧半径对切削过程的影响

The effect of the corner radius on root stress of involute gear

刀尖圆弧半径对渐开线齿轮齿根应力的影响

Offect of Corner Radius of Lathe Tool in NC Turning Chinese Corner

数控车削中的刀尖半径补偿

This paper is mainly on how to remove inaccuracy by compensating the corner radius.

主要讨论怎样用刀尖圆弧半径补偿功能来消除误差。

Influences of Corner Radius On Machining Accuracy of Numerically-controlled Lathe

刀尖圆弧半径对数控车床加工精度的研究

The effect of different thickness is the largest, followed by the corner radius, forming speed and number is smaller effect.

其中不同厚度的影响最大，其次为弯角半径，成形速度和道次数的影响较小。

It is found that the flanging height is increasing with the increase of thickness and the corner radius.

发现随着厚度和弯曲圆角半径的增加，翻边高度增大。

A bigger corner radius and smaller friction were helpful to improve the strain homogeneity inside the processed sample.

增大模具过渡圆角半径及减小摩擦系数均能有效地改善试样内部等效应变分布的均匀性。

4-corner intersection curb. Corner radius can be specified.

四角十字路口路缘。可指定拐角的半径。

Rounded-entry driveway. Corner radius can be specified.

入口为圆角的车道。可指定拐角的半径。

With the feed rate and cutting depth increases, surface roughness increases. The surface roughness first increases then decreases along with the increasing of corner radius.

表面粗糙度正交试验的结果表明：表面粗糙度随着切削速度的增大而减小，随着进给量和背吃刀量的增大而增大，随着刀尖圆弧半径的增大出现先减小后增大。

The results indicate that the cutting corner radius is lesser, the tool is sharper, but it wears out quickly and makes the cutting force increases.

结果表明，刀刃钝圆半径越小，刀尖越锋利，但是磨损较快，切削力很快增加。

By setting supplemental allowance at arc wall to increase the round corner radius of inner flange of the open hole, the casting crack was completely eliminated.

有针对性地设置圆弧壁补贴，加大敞开口内法兰边的圆角尺寸，完全消除了铸件裂纹。

In this paper, the revisory formula of static carrying capacity of RHS T connection is suggested with the corner radius of chord taken into account.

为此将考虑弦杆截面圆角效应，并提出关于T型方管节点静力承载力的修正公式。

When manufacturing the part surfaces of cone or arc by CNC lathe, it causes more or less cutting because of the existence of the corner radius of lathe tool.

在数控车削加工含有圆锥或圆弧面的零件时，刀尖圆弧会造成零件过切或少切现象。

Based on the model, the relations between the pre-bulged pressure and central deflections and the effects of the corner radius and preformed pressure on the bursting properties were studied.

基于此模型，系统研究了普通正拱形爆破片预拱成形压力与拱高之间的关系，及根部圆角和成型压力对爆破性能影响。

In this paper, the geometric model which was used to consider corner radius, feed per tooth, cutting speed, number of teeth and difference of height of tool nose was, developed.

从几何上考虑了刀尖圆弧半径、每齿进给量、切削速度、铣刀刀齿数、刀片刀尖高度差等因素对表面形成的影响，并建立了其几何模型的数学公式。