fabricated的例句大全

By use of combined self-propagating high-temperature synthesis, induction melting with investment casting, in-situ TiB reinforced titanium matrix composite is fabricated in Ti-B-Al system. Phase identification and reinforcement morphologies are performed with XRD, SEM and TEM.

采用自蔓延高温合成（SHS）、感应熔炼和熔模精铸相结合的方法，利用Ti-B-Al体系制备出了原位自生TiB增强的钛基复合材料。

These in-plane gates are fabricated by a self-aligned process, which are used to squeeze the channel and to form a single dot at the constriction of the channel.

设计了点接触平面栅型硅单电子晶体管，利用自对准技术实现了点接触平面栅，并通过给平面栅施加偏压实现了量子点。

Flake Ag/ SnO_2 powder was fabricated when with sulfurous acid as the reducing agent.

用亚硫酸为还原剂可以得到片状的Ag/SnO2粉体。

The storey element, which can model one storey of the frame-shear wall structure is fabricated. Based on SRSS method, the frame-shear wall structure with shear wall interruption at different heights is analyzed. The conditions of interruptable shear wall height are established.

构造能模拟一层框剪结构的层单元，用振型分解反应谱法分析不同高度和结构刚度特征值的断层剪力墙框剪结构的地震反应，设定可中断剪力墙高度的条件。

The performance of LDWS, such as intensity control, coordinates orientation and auto focusing, directly affects the diffractive efficiency of fabricated element.

激光直写系统的性能，比如光强控制、坐标定位以及自动对焦等，直接影响制成器件的衍射效率。

Silicon thin films with different structures fabricated by VHF-PECVD by using Raman scattering were studied and photo thermal deflection spectra ( PDS).

采用VHF PECVD技术制备了不同结构的Si薄膜，用喇曼（Raman）散射光谱和光热偏转谱（PDS）分别对材料的结构进行了研究。

Microstructure and hydrogenation properties of Mg and Mg-Ni films fabricated by thermal evaporation method were investigated.

采用热蒸发法制备了纯Mg膜及Mg（78）Ni（22）合金膜，研究了薄膜的结构及其氢化性能。

The copper nanoparticles were fabricated by the thermal evaporation method, heated to form cupric oxide nanoparticles.

本实验采用热蒸镀法制备铜奈米微粒，并利用热板对其加热得到氧化铜奈米微粒。

In order to control the growth of ZnO nanowires effectively, the authors have fabricated ZnO nanowires by thermal evaporation under the condition of electric field.

为了有效控制ZnO纳米线的生长，采用物理热蒸发法在外加电场的条件下制备ZnO纳米线。

The experimental prototype of thermal tracer flow meter is designed and fabricated, dynamic experiment is done on the multiphase flow in horizontal wells experimental system.

设计并加工了热示踪流量计的实验样机，在水平模拟井多相流实验系统上进行了动态模拟井实验。

FT-IR study of silicon dioxide films fabricated by rapid thermal oxidation

快速热氧化制备二氧化硅薄膜的红外研究

Chemical cross-linking gel polymer electrolyte was fabricated by the method of in-situ thermal polymerization.

采用单体热聚合的原位电解质凝胶法制备了化学交联型凝胶聚合物电解质。

The Thermo-hydrodynamic ( THD) effect in non-contact mechanical seals includes the thermal wedge caused by the frictional heat of the fluid film and the hydrodynamic wedge of the shallow grooves fabricated on the end face of the rotating sealing ring.

非接触式机械密封中的热流体动力效应包括密封环端面受热变形后引起的热楔效应和端面上动压槽引起的动力楔效应。

Polycrystalline Vanadium Oxides thin films deposited on Si ( 110) and quartz substrates for thermo-sensitive material of uncooled IR detector arrays were fabricated by ion beam sputtering deposition and oxide process.

采用离子束溅射镀膜和氧化工艺在Si（110）和石英衬底上制备了用于非致冷红外探测器阵列热敏材料的混合相氧化钒多晶薄膜。

The polycrystalline vanadyl phthalocyanine ( VOPc) nanoparticles in phase I and phase II have been fabricated by laser ablation in aqueous solution without or with a kind of nonionic surfactants respectively.

在水溶液中利用激光消融制备了酞菁氧钒（VOPc）相I型纳米颗粒，在加入一种非离子型表面活性剂的情况下通过激光消融制备得到了其相II型纳米颗粒。

An integrated microstructure PCR-DNA amplification biochip based on MEMS technology was fabricated, which includes heater, temperature sensor, reaction chamber and inlet channels.

基于MEMS技术研制了微结构的集成PCR-DNA分子扩增生物芯片，芯片集成了加热子、温度传感器、反应室、进样通道等；

Mechanical and Tribological Properties of c/ w_2b_5 composites fabricated by reaction hot-pressing

反应热压制备C/W2B5复合材料的力学和摩擦磨损性能

An advanced Al_3Ti-TiB_2-SiC/ Al-13% Si Composite was fabricated by compound technologies of in-situ reaction& liquid stirring. Thermodynamics of formation of reinforcing phases in composite was calculated in theory and analyzed, and temperature of reaction in-situ was validated by DTA test.

对利用原位反应与高剪切液态搅拌复合专利技术制备的Al3Ti TiB2SiC/Al13%Si复合材料的增强相的形成热力学进行了理论计算和分析，并采用差热分析法（DTA）进行了试验验证。

Properties of CeB_6 Cathode Fabricated by Spark Plasma Reactive Liquid Phase Sintering Method

放电等离子反应液相烧结制备CeB6阴极与性能研究

A porous TiAl intermetallics is fabricated using Ti and Al elemental powder by reactive sintering process, and the relationships between pressing pressure and porosity, maximum size as well as permeability coefficient are analysed.

以Ti、Al混合粉末为原料，通过反应烧结制备TiAl金属间化合物多孔过滤材料，分析压制压力对孔隙率、最大孔径及渗透系数的影响。