hot press的例句大全

In order to reduce moisture content of compressed wood and improve its moisture distribution, two methods can be adopted, one is to lower down initial moisture content of thinnings to be compressed, the other is to extend the hot press time.

为了降低压后含水率，使水分分布均匀，可以采取两种办法：一是使初始含水率尽可能低，二是热压时间尽可能长。

in this paper, sic particulate reinforced magnesium matrix composites were prepared by conventional hot press sintering process and specimen current heating hot press sintering process.

本文采用电流直加热法和普通热压法，以纯镁为基体，以SiC颗粒为增强相，制备了SiC颗粒增强镁基复合材料。

In this paper, the preparation process of thermosetting resin composite materials from ramie noil fiber, hot press felt and non woven fabrics were introduced.

本文介绍了落麻纤维、落麻热压毡、落麻无纺毡制备热固性树脂复合材料的工艺过程；

When setting temperature of hot press drum to 40 degrees Celsius.

这时热压滚筒温度可调至40摄氏度.

Prepare Ti_3Al/ TiC+ Al_2O_3 Ceramic Composite by Phase Change in Solid State-Sintering under Hot Press

固态相变-热压烧结制备Ti3Al/TiC+Al2O3陶瓷复合材料

The preliminary on the sliding wheel type automatic water proof and immersion proof equip ment's design for the hot press used for fiber board production with wet process

湿法纤维板热压机滑轮式自动挡水防渍装置设计浅探

Effects of Hot Press on Rice Husk/ Wood Composites

热压工艺对稻壳-木材复合材料性能影响的研究

Analysis on Hot pressing Technology Control in Production of MDF by Continuous Press

浅析连续平压法生产MDF热压工艺的控制

With the different working conditions, the life of hot press roll forging die is quiet different.

因工作条件的不同, 辊锻模寿命相差也极为悬殊.

Improving design on hydraulic system of single opening hot press for thin MDF

中密度薄板单层热压机液压系统的改造

In this thesis, using the vacuum hot pressing diffusion welding ( Vacuum Hot Pressing Diffusion Welding), which is called VHP for short, can achieve the bonding of industrially pure titanium and pure copper.

本课题采用真空热压扩散焊接（Vacuum Hot Pressing Diffusion Welding），简称VHP来实现工业纯钛和工业纯铜的扩散连接。

The Design of Hydraulic System to Reduce Energy Depletion of Wood-based Multilayer Panel Hot Press

人造板多层热压机低能耗液压系统设计

Hot press reaction sintering and mechanical properties of boron carbide

B4C陶瓷热压反应烧结及力学性能

Study on the stress of lumber in the process of hot press drying

木板热压干燥应力研究

During the operation of hot press, because there was hysteresis characteristic in the proportional overfall valve, the regular control of press was not very clear, we used "PID-FUZZY" control policy for the hot press, got good results from the simulation operation.

针对实验压机运行过程中存在的由比例溢流阀的滞环效应所引起的常规控制方式对压力控制效果差的问题，采用PID-FUZZY控制策略对热压压力进行调节，模拟运行并取得了良好的效果。

Joining Tungsten Alloy molybdenum Layered Flier plates by Hot press Sintering

钨合金-钼叠层飞片的热压烧结连接

A Design for the Hot Press Machine of Movable Table

移动式工作台热压机的设计

industry: pressure welder; soldering machine; hot press; crimping machine; bonder;

所属行业：压焊机；焊锡机；热压机；压接机；邦定机；；

Study on Microcomputer Measurement and Control System for Hot-press of MDF

中纤板热压机微机测控系统的研究

Ti-Al composites, reinforced with Al2O3 particles and whiskers, were synthesized by in-situ reaction hot-pressing method and embedding sintering method respectively.

采用原位反应热压与覆埋烧成工艺，分别制备了Al2O3颗粒与晶须增强Ti-Al基复合材料。