joint welding的例句大全

To solve the problem, the welding joint construction-designed and argon-arc welding was employed.

解决措施为采用氩弧焊,改进焊接结构设计等.

Study on the Joint Deformation and the Interface Contaminant Ejection Rate in DC Upset Butt Welding.

直流电阻对焊接头变形和界面污物清除率研究.

As a new technique, laser welding is implemented to realize the joint of galvanized steel.

激光焊接是实现镀锌钢焊接的一种新方法.

The dynamic change of the molten pool influences the quality of welding joint directly in TIG.

TIG焊接 过程中,熔池的动态变化直接影响焊接质量.

Influence about Weld Joint Property and Destruction of Aluminium Lithium Alloy by Argon Arc Welding Method

氩弧焊接方法对铝锂合金焊接接头性能和破坏的影响

To solve the problem, the welding joint construction was re-designed and argon-arc welding was employed.

解决措施为采用氩弧焊，改进焊接结构设计等。

The profile butt-welding is the most typical welding structure of ship welding, it includes the butt welding of outer plate, the butt welding of panel, the butt welding of web plate, the angle joint of outer plate and web plate.

型材对接焊是船舶焊接中最典型的焊接结构，包含了外板的对接焊缝、面板的对接焊缝、腹板的对接焊缝和腹板与外板的角接缝四条焊缝。

Based on this, the paper selects typical welding joint in the shipbuilding process, mainly including the butt welding of web plate, the butt welding of panel, the butt welding of plate, the angle joint of plate and web plate.

基于此本文选取船体建造过程中典型的焊接对接接头，该焊接接头主要由平板的对接、腹板的对接、面板的对接以及腹板和平板的角接组成。

The joint shapes suited for CO_2 welding are designed Under which weld quality is still assured but the groove angle and size of fillet weld are reduced. By ways of these the productivity is increased and cost decreased.

提出了适合于CO2焊特点的接头形式，该接头形式在保证焊接质量前提下，减小了对接焊的坡口角度及角焊缝的焊脚尺寸，可以提高焊接生产率，降低成本。

Improvement on Welded Structure for End to End Joint Sleeves of the Motor Rotor as well as Argon-arc Welding

电机转子并头套焊接结构改进与氩弧焊接

Influence on different VD 9 joint to arc initiation and stability of NSA-500-1 argon-arc welding machine

NSA-500-1型氩弧焊机VD9不同接法对引弧和稳弧的影响

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

According to the unevenness of concave welding joint, it studies dynamic performance of high speed trains running on the slab track.

针对焊接凹接头不平顺，研究高速列车通过板式轨道时的动力学性能。

The methods of short network layout, direct welding or both compression joint and welding between connections are concluded according to long trem practices to reduce electric resistance in contact surface, increase integral electrical conductivity of the short network and power factor of the furnace.

长期生产实践总结出矿热炉短网布置与各个联结部位采用直接焊接或压接加焊接，软母线整体浇注等方法，可降低接触面的电阻，提高短网整体导电性能与电炉功率因数。

Repair Welding Joint Boundary Structure and Performance of Explosion Composite Plate

爆炸复合板补焊接头界面的微观组织与性能

The welding joint crack and ultrasonic test of power plant pipes

电站管道焊接接头裂纹与超声波检测

The tensile strength of the joint of pulse submerged arc welding is 50 MPa higher than that of ordinary submerged arc welding, which is about 12% higher. Under the same heat input, there is failed test piece in the ordinary submerged arc welding.

脉冲埋弧焊比普通埋弧焊在抗拉强度上增50MPa，大约12%左右，普通埋弧焊在与脉冲埋弧焊同样的热输入条件下出现了不合格试件。

Optimization of Welding Parameters and Microstructure of Welded Joint of Al 2O 3P/ 6061Al Composite

Al2O（3p）/6061Al复合材料焊接工艺参数的优化及接头组织

The weak point of friction stir welding joint for 7075 aluminum alloy occurs in the TMAZ.

7075铝合金搅拌摩擦焊接头的薄弱点在热机影响区.

TA 15 titanium alloy T joint obtained by EBW ( electron beam welding )-brazing hybrid welding was investigated.

实现了 TA15 钛合金T形接头的电子束焊 — 钎焊复合焊接.