laser weld的例句大全

non-damage measurement of laser weld diamond circular saw blade

激光焊金刚石圆锯片的无损检测

laser weld and laser heat treatment

激光焊接与激光热处理

Orthogonal experiment design method is used to determine the optimum laser double-side welding parameters. The tensile strength of the retro-welding samples is used as the indicators of evaluating laser welding performance. The tensile and bending fatigue test are used to study the mechanical properties of welded joint.

选用正交试验设计方法确定Fe-Mn-Si形状记忆合金激光双面焊接的最佳工艺参数，以焊接后试样的抗拉强度作为评定焊接性能的指标。

The effects of side-blown operating parameters on the behavior of laser induced plasma and the weld seam geometry have been studied with the aid of high-speed CCD imaging in CO 2 laser welding process of thin stainless steel plate.

为了研究侧吹气体对CO2激光焊焊缝成形的影响及其机理，在不锈钢薄板CO2激光焊接过程，用高速数字摄像机拍摄了不同侧吹工艺参数下等离子体的动态变化过程。

microstructural characteristics and mechanical properties of laser weld bonded joints in magnesium alloy

镁合金激光胶接焊接头微观及力学性能

Research on Weld Penetration Monitoring by Laser Plasma Optical Signal in Laser Welding

激光深熔焊焊缝的熔透性监测研究

research on laser weld seam tracking sensing technology in plasma arc welding processing

等离子弧焊接过程中激光焊缝跟踪传感技术研究

Light emission from the plasma in laser welding of zinc-coated plates when there appeared pinhole in the weld were analysised on magnitude and frequency ranges.

对镀锌板激光拼焊过程中焊缝上出现孔洞时的等离子体光信号进行了幅域和频域分析。

It can be used to weld the refractory metal and metal that difficult to weld, such as titanium alloy, aluminum alloy, etc. In addition, laser welding process has no pollution to the environment and the technology is easy to master.

它能够焊接难熔、难焊的金属，如钛合金、铝合金等。此外，激光焊接过程对环境没有污染，技术简便。

The influences of the filler metal powder on the laser power density threshold value, weld formation and process stability were studied during CO_2 laser welding of aluminum alloy.

研究了填充合金粉对CO2激光焊接功率阈值、焊缝成形和焊接过程稳定性的影响。

Study on China Low Activation Martensitic Steel in Laser Weld

中国低活化马氏体钢的激光焊接研究

Results show that CO2 laser welding has advantages of high welding speed, distortion free and excellent weld profile with the mechanical property and deep drawing ( cupping) similar to that of the base metal.

结果表明，使用CO2激光焊接工艺焊速高，可以获得无变形，成形性良好的焊接接头，其力学性能和深冲加工（杯突试验）均与母材相当。

This paper also introduces some laser weld equipment and weld process, performance of WTB and its application.

介绍了激光焊接的设备与工艺、焊接钢板的性能与应用。

Some weld grain characteristics show significantly layered phenomenon. The characteristics of stratification phenomenon have been explained through laser welding overlapping and flow characteristics of liquid pool metal.

部分焊缝组织晶粒特征有明显的分层现象，并通过脉冲激光焊重叠度和熔池液态金属的流动特对分层现象进行解释。

properties of arc and weld in laser-tig hybrid process

激光与电弧相互作用时的电弧形态及焊缝特征

A beam of light produced by a laser can weld metals.

激光器发生的光束可以焊接金属.

A beam of light produced a laser can weld metals.

激光器发生的光束可以焊接金属.属类:[综合句库]-[-].

Easy installation , good exchanging capacity . Sealed hermetically with damp proof material ( glue envelop and laser-welded ).

有良好的防潮密封 ( 可选用胶封和激光焊接 ),适应恶劣工作环境.

The interaction between laser beam and plasma arc, which changed with laser power and welding speed, had an important influence on weld width and ratio of bottom to top width of weld.

激光/等离子电弧协同效应随激光功率和焊接速度变化而不同，从而影响复合焊焊缝的熔宽和熔宽比。

Tear test on Al-Li alloy 1420 and laser-welded joints was carried out.

对1420铝锂合金及其激光焊接头的撕裂韧性进行了研究。