material properties的例句大全

Reinforced concrete structures during construction consist of concrete elements with changing material properties and the temporary supporting system.

施工期钢筋混凝土结构是由材料性能不断变化的混凝土构件以及临时支撑组成的时变结构。

Which can quantitatively reflect the effects of cyclic loading conditions, material properties and corrosion environment on the initiation life and propagating rate of the cracks.

这些表达式能定量反映循环加载条件、材料性能及腐蚀介质对裂纹起始寿命和裂纹扩展速率的影响。

An Investigation of Material Properties of Aluminium Extrusions 6082 ( T5) and the Establishment of FLD

铝合金AA6082（T5）挤压型材基本力学性能试验和成形极限图的建立

It is pointed that groundsill and backfill material properties and reinforcement effect on abutment backfill stability markedly.

研究发现：地基与回填材料的强度、性能以及加筋条件对台背回填稳定性的影响都非常显著。

Effect of hydrostatic test on material properties of air cylinder for metro vehicle

水压试验对地铁车辆储风缸材料性能的影响

study on arc spray molding material properties

电弧喷涂模具材料性能研究

an obvious question is whether anything can be done to restore material properties after welding a strain-hardened material.

很明显的问题是：是否可在焊接应变硬化后，采取某些措施恢复材料性能。

bending capacity refers to the difficulty level that frame is processed to bends with no defects and certain curvature. bending capacity is determined by the geometric dimensioning, material properties and the bending degree of the frame.

弯曲能力是指型材被加工成没有缺陷、一定曲率弯曲件的难易程度，它是由型材的几何尺寸、材料性能和弯曲程度所决定的。

Material properties are very complicated, a great time variability.

材料性质十分复杂，具有极大的时空变异性。

Based on the thermodynamic analysis and Equation of State ( EOS) of RKS, the material properties can be calculated by programming. Then the theoretical model of ACR system is established, and the simulation results are gotten.

为指导实验，我们以热力学分析和RKS状态方程为基础，编写混合工质物性计算程序，建立自行复叠制冷循环理论模型，对系统进行仿真计算。

Textiles Terms of textile material properties and test Part 1: Fibre and yarn

GB/T3291.1-1997纺织纺织材料性能和试验术语第1部分；纤维和纱线

In the current model of cutting force, Oxley model is the one which considers the material properties comprehensive mostly. However, the material strain rate effects and thermal softening effects are still considered less than.

目前所得到的切削力模型中，Oxley模型相对来说是考虑材料性能最全面的，但是对于材料的应变速率效应及热软化效应考虑不足。

Compared with the strategy of improving Z through innovating the material properties, this approach provides a new physical way of enhancing the cooling efficiency of the thermoelectric cooling element, when the material reached its limit.

与通过改进材料来提高制冷性能的方法相比，该方法可在材料性能已趋极限时，提供一种新的物理途径用以强化热电冷却元件制冷性能。

Determination of the material properties of lead meta& niobate piezoelectric ceramics

偏铌酸铅压电陶瓷材料性能的测定

Using an active infrared testing technology and flash lamp to heat the sample, we do researches on the material properties and interior structural information.

采用主动式红外检测技术，用闪光灯脉冲热源加热试件，来研究试件材料的均匀性和内部结构信息。

There are different kinds of material properties like diffuse, specular, ambient, etc.

材质属性具有不同的的类型，例如漫射、射、境等等。

Results show that response at surface points of the alluvial soil deposit are amplified significantly for given conditions of shape, dimension and material properties of the soil and the canyon.

计算结果表明：在给定河谷形态、尺寸和材料性质条件下，沉积层表面各点的响应显著放大。

Therefore the construction process and material properties of RCC arch dam must be simulated precisely so as to take reasonable engineering measures to reduce the thermal stress in the dam.

所以，必须准确模拟碾压混凝土拱坝的施工过程和材料特性，仿真计算拱坝温度场和应力场，以便采取合理的工程措施，减少坝体的温度应力。

Transient temperature field analysis of functionally gradient material plate with temperature-dependent material properties under convective heat transfer boundary by finite element method

对流换热边界下变物性梯度功能材料板瞬态温度场有限元分析

Base on the analyses of temperature and intra-laminar thermal force between layers, we can get that the compressive intra-laminar thermal force relates with laminar material properties, processing parameters, and the thermal-mechanical behavior of the adhesive viscosity in the LOM processing.

通过对内部的温度和热应力的变化分析得出，收缩热应力与材料层的性质、工艺参数、和粘胶的粘性有关。