pressure profile的例句大全

Mathematical formulas are derived comprehensively and systematically for the profile coordinate, pressure angle and radius of curvature of the cylindrical cam with an oscillating roller follower.

推导了摆动滚子从动件圆柱凸轮廓线、压力角及廓线曲率半径方程，讨论了该种凸轮机构在各种运转情况下与之相适用的方程。

The simulation result predicted a reasonable thickness profile of the final bottle comparing with the experiment. Also, the effect of stretch process and blowing pressure on the thickness profile of bottle was investigated numerically.

通过计算值与实验值的对比，表明模拟能够较好地预测成型瓶子的厚度分布，并研究了拉伸速率、吹胀压力等工艺参数对瓶子厚度分布的影响。

STUDY ON ENERGY-SAVING OF CONDENSING PRESSURE REGULATION STRATEGY FOR AIR-COOLED CONDENSER Research on profile control characteristics of weak gel by multi-spots pressure measure-ment

风冷式冷凝器冷凝压力调节的节能特性研究应用多点测压法研究弱凝胶深部调剖性能

Selecting well for profile control in injection well in common field use is PI decision which value includes the influence of injecting pressure, well bore storage coefficient, skin coefficient that can t instruct the job of selecting well for profile control properly.

现场常用的注水井调剖选井方法是PI决策，但PI值包含了注水压力、井筒储容系数、表皮系数的影响，不能准确地指导调剖选井。

Fracturing pressure in formations was the basic data for designing weight, well profile and hydraulic fracturing.

地层破裂压力是钻井液密度确定 、 井身结构和压裂设计施工的基础数据.

The thickness of the oxide layer is analyzed by AES depth profile, and the law of influence of temperature, oxygen pressure and time on the thickness of the oxide layer is studied respectively.

用AES深度剖析研究了氧气氧化层的厚度，并研究了温度、氧气压力和时间对氧气氧化层厚度影响的规律；

The cylinder wall profile has direct influence on discharge volume, pressure variety and vane's motion.

旋叶式压缩机中的气缸内壁型线直接影响着排气量 、 压力变化规律、滑片的运动等.

The piston pump with cylindrical cam-drive mechanism changes the discipline of the movement of the plunger through the cylindrical cam-drive mechanism with special profile, which leads to no fluctuation in constant flow and pressure. The uneven degree of theoretical flow is zero.

圆柱凸轮柱塞泵是通过具有特殊轮廓曲线的圆柱凸轮机构改变柱塞的运动规律，使其流量和压力基本无波动，流量不均度理论上为零。

Three-dimensional pressure distribution of the cascades with aft-loading profile and the influence of loss development

后加载叶型叶栅的三维压力场及其对损失发展的影响

Larger slip coefficient produces larger slip velocity, fatter radial velocity profile, smaller pressure and squeeze force.

当滑移系数增大时，壁面的滑移速度增大，径向速度的剖面更加扁平，流体压力减小，圆盘挤压力减小。

The harmonic variation of the normal contact pressure or the maximum Hertzian pressure results in a wavy rolling contact surface profile.

不同的最大赫兹接触压力对残余应力和残余应变影响较大。

The distribution width of pressure and film profile is increased, secondary pressure peak and minimum film thickness shift rearward in the case of considering plastic factor.

此外塑性变形因素的存在使得接触区的压力和油膜分布宽度增加，第二压力峰和最小膜厚点后移。

It is confirmed by laboratory test and field test that both of them have good effect on unplugging in oil well, decreasing pressure and increasing injection rate in water well, profile control at well group, reservoir sweep, and so on.

室内实验和矿场应用结果表明，在油井解堵、水井降压增注及井组调剖驱油等方面都见到良好效果。