reactive sintering的例句大全

On the basis porous carbon , the reactive sintering silicon carbide ceramics were prepared by ihrigizing reaction.

以此为基础, 进一步通过渗硅反应,制成反应烧结碳化硅陶瓷.

The composites of different Mo/ Si ratio were prepared by vacuum liquid reactive sintering. The phase composition and microstructure of composites was analyzed by XRD and SEM, respectively. Their coefficients of thermal expansion ( CTE) were measured by thermal dilatometer.

利用液相反应烧结制备不同配比的Mo-Si复合材料，用X射线分析相组成，扫描电镜观察微观组织形貌，热膨胀仪测不同块体材料的热膨胀系数（CTE）。

The Workmanship of Thermal Spray Coating Medium Temperature Reactive Sintering

热喷涂层的中温反应烧结工艺

The expansion and dehiscence behavior during the vacuum reactive sintering below 660 ℃ of compact Ti/ Al composite powders was experimentally investigated, and the reasons of expansion and dehiscence were theoretically analyzed.

低温反应烧结工艺：研究了高能球磨Ti/Al复合粉体在温度低于660℃下真空无压反应烧结过程中的膨胀和开裂行为，分析了产生膨胀和开裂的主要原因；

Preparation of bauxite based p-Sialon bonded corundum composite ( BSC) through reactive sintering were investigated, using bauxite, silicon, fused white corundum grains, and additives as the raw materials.

本文研究了以高铝矾土、Si、电熔白刚玉颗粒及细粉和部分添加剂为原料，氮气气氛下通过反应烧结的方法一步制备矾土基β-Sialon结合刚玉复合材料的工艺。

Especially, the CIP could achieve near net-shape or net-shape forming. In the paper, the silicon power was raw material, shaped in CIP. The pure Si_3N_4 and multiphase ceramics were prepared in reactive sintering.

本论文以硅粉为原料，通过冷等静压成型，采用反应烧结制备出纯Si3N4陶瓷和Si3N4基复相陶瓷。

Research progress on reactive sintering of silicon nitride

氮化硅反应烧结的研究进展

A study on Sintering Mechanism of the Reactive Sintering of Zircon Porous Ceramics

反应烧结锆英石质多孔陶瓷烧结机理初探

The Reactive Sintering Technique for Preparing the Compounds of Si and Mo

反应烧结法制备硅钼化合物

Effect of reactive sintering temperature on properties of Si_3N_4-SiC refractories

反应烧结温度对Si3N4-SiC材料性能的影响

Influence of titania oxide on reactive sintering process and properties of β-sialon

二氧化钛对β-sialon反应烧结及其性能的影响

Synthesis of SiC/ MoSi_2 Composite by Mechanical Alloying and Reactive Sintering

机械合金化反应烧结制备SiC/MOSi2复合材料

Microstructure evolution and bonding mechanism of thermal sprayed Ni-Al coating during reactive sintering

Ni-Al喷涂层反应烧结的组织演变与结合机制

Effect of Al Addition on Synthesis of Ti_3SiC_2 Powder by Pressureless Reactive Sintering

添加Al对无压反应烧结制备Ti3SiC2粉末的影响

Phase Composition and Coefficient of Thermal Expansion of Mo-Si Composites Prepared by Liquid Reactive Sintering

Mo-Si材料相组成与热膨胀性能的研究

The Effect of Y_2O_3 on the Properties of Porous Si_3N_4 Ceramic Prepared by Reactive Sintering

Y2O3对反应烧结制备Si3N4多孔陶瓷的影响

Selecting for Best Evolution of Interface Microstructure in Thermal Sprayed Ni-Al Coating during Reactive Sintering

Ni-Al喷涂层反应烧结时界面结构的择优演变

Synthesis of Sr_2CeO_4 Phosphor by Mechanical Milling and Reactive Sintering

机械球磨与反应烧结合成Sr2CeO4发光体的研究

Densification behavior during reactive sintering of compacted Ti/ Al composite powders prepared by high energy ball milling

高能球磨Ti/Al复合粉体的反应烧结致密行为

Synthesis of YAG ∶ Ce~ ( 3+) Phosphor by High Energy Milling and Reactive Sintering

高能球磨与反应烧结合成YAG∶Ce~（3+）荧光粉的研究