reactive sintering

Selecting for Best Evolution of Interface Microstructure in Thermal Sprayed Ni-Al Coating during Reactive Sintering

Ni-Al喷涂层反应烧结时界面结构的择优演变

Preparation of porous TiB_2-TiC multiphase ceramics by reactive sintering

反应烧结制备多孔TiB2-TiC复相陶瓷

Research progress on reactive sintering of silicon nitride

氮化硅反应烧结的研究进展

Phase Composition and Coefficient of Thermal Expansion of Mo-Si Composites Prepared by Liquid Reactive Sintering

Mo-Si材料相组成与热膨胀性能的研究

The Effect of Y_2O_3 on the Properties of Porous Si_3N_4 Ceramic Prepared by Reactive Sintering

Y2O3对反应烧结制备Si3N4多孔陶瓷的影响

A porous TiAl intermetallics is fabricated using Ti and Al elemental powder by reactive sintering process, and the relationships between pressing pressure and porosity, maximum size as well as permeability coefficient are analysed.

以Ti、Al混合粉末为原料，通过反应烧结制备TiAl金属间化合物多孔过滤材料，分析压制压力对孔隙率、最大孔径及渗透系数的影响。

Using powders prepared by high-gravity reactive precipitation ( HGRP), the characteristics of sintering kinetic curves of BaTiO_3 ceramics were studied in this work by means of a thermal dilatometer.

以超重力反应沉淀法（HGRP）制备的纳米钛酸钡粉体为原料，以热膨胀仪为测试手段，对钛酸钡陶瓷的烧结动力学曲线特征进行了研究。

Synthesis of SiC/ MoSi_2 Composite by Mechanical Alloying and Reactive Sintering

机械合金化反应烧结制备SiC/MOSi2复合材料

Reactive sintering of ceramics on the base of boron nitride was studied, and the inert filler was given in this paper.

研究了氮化硼陶瓷的反应烧结，给出了所用惰性填料。

The composites of different Mo/ Si ratio were prepared by vacuum liquid reactive sintering. The phase composition and microstructure of composites was analyzed by XRD and SEM, respectively. Their coefficients of thermal expansion ( CTE) were measured by thermal dilatometer.

利用液相反应烧结制备不同配比的Mo-Si复合材料，用X射线分析相组成，扫描电镜观察微观组织形貌，热膨胀仪测不同块体材料的热膨胀系数（CTE）。

A study on Sintering Mechanism of the Reactive Sintering of Zircon Porous Ceramics

反应烧结锆英石质多孔陶瓷烧结机理初探

Study on the Characteristics of Composition Distribution at the Interface of Thermally Sprayed Ni-Al Coating Formed by Reactive Sintering at Median Temperature

Ni-Al涂层中温反应烧结界面成分分布特性的研究

The electron-heating porous ceramic was prepared by reactive sintering which main raw is SiC and petrol coke.

电致发热多孔陶瓷是以SiC为材质，利用反应烧结法制备而得的一种多孔陶瓷材料。

The Reactive Sintering Technique for Preparing the Compounds of Si and Mo

反应烧结法制备硅钼化合物

Synthesis of YAG ∶ Ce~ ( 3+) Phosphor by High Energy Milling and Reactive Sintering

高能球磨与反应烧结合成YAG∶Ce~（3+）荧光粉的研究

A Study on Reactive Sintering of TiH_2-TiB_2

TiH2-TiB2反应烧结研究

Densification behavior during reactive sintering of compacted Ti/ Al composite powders prepared by high energy ball milling

高能球磨Ti/Al复合粉体的反应烧结致密行为

The Workmanship of Thermal Spray Coating Medium Temperature Reactive Sintering

热喷涂层的中温反应烧结工艺

The SiC/ MoSi_2 composite was prepared by mechanical alloying ( MA) and reactive sintering method.

对机械合金化SiC／MoSi2的先驱粉体及随后反应烧结制备SiC／MoSi2复合材料工艺研究表明：经机械合金化的先驱粉体主要成分为MoSi2。

Effect of reactive sintering temperature on properties of Si_3N_4-SiC refractories

反应烧结温度对Si3N4-SiC材料性能的影响

Reactive sintering has emerged as a new and promising technique for synthesizing particulate reinforced metal matrix composites ( MMCs).

反应烧结是合成颗粒增强金属基复合材料（MMCs）的新工艺。

Microstructure evolution and bonding mechanism of thermal sprayed Ni-Al coating during reactive sintering

Ni-Al喷涂层反应烧结的组织演变与结合机制

The new sintering process is accomplished by the reactive sintering of newly formed Si_2 N_2O or SiO_2 phases.

结果表明：该工艺特点是新生的Si2N2O或SiO2进行活性烧结；

On the basis porous carbon , the reactive sintering silicon carbide ceramics were prepared by ihrigizing reaction.

以此为基础, 进一步通过渗硅反应,制成反应烧结碳化硅陶瓷.

On the basis of porous carbon, the reactive sintering silicon carbide ceramics were prepared by ihrigizing reaction.

以此为基础，进一步通过渗硅反应，制成反应烧结碳化硅陶瓷。

Synthesis of Sr_2CeO_4 Phosphor by Mechanical Milling and Reactive Sintering

机械球磨与反应烧结合成Sr2CeO4发光体的研究

Effect of Al Addition on Synthesis of Ti_3SiC_2 Powder by Pressureless Reactive Sintering

添加Al对无压反应烧结制备Ti3SiC2粉末的影响

The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.

通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。

In this paper, the workmanship of reactive sintering of thermal spray coating, microstructure and bonding property are introduced.

介绍了热喷涂层的中温反应烧结工艺，及其组织结构的特点和涂层结合性能。

Influence of titania oxide on reactive sintering process and properties of β-sialon

二氧化钛对β-sialon反应烧结及其性能的影响