resin content的例句大全

The Resin Content on-line Monitoring in Composite Prepreg Tapes Using Beta-ray Technique

用β射线技术在线监测复合材料预浸带树脂含量

Glued resin content affected longitudinal tensile strength significantly and the impacting of board density to all mechanical properties reached to a significant level. In the testing range other factors and levels affected the board properties indistinctively.

单板涂胶量对板材顺纹抗拉强度影响达到显著水平，板材密度对各力学性能影响均达到显著水平；其余因素各水平在试验选定范围内，并未对板材各性能指标有显著的影响。

The influence of the resin content on temperature and pressure in the hot-pressing process of flakeboard is illustrated for first time based on the experiment results: ( 1) consuming adhesive is favorable to the heat transfer process on the direction of thickness.

首次通过实验阐明了施胶量对刨花板热压过程中温度和压力的影响：（1）施加胶粘剂有利于板坯厚度方向上的传热。

Increasing the temperature of preheating, the mandrel-pressure roller and the hot air gun and choosing the moderate pressure of pressure roller come along with a rise in interlaminar shear strength ( ILSS) and a reduction in resin content.

结果表明：提高芯模压力辊温度、热风枪温度、预热器温度，选择适中的压力辊压力，在层间剪切强度提高的同时，树脂含量下降。

Preparation of High Pure Epoxy Resin with Low Hydrolyzable Chlorinity Content

高纯和低可水解氯含量环氧树脂的制备

Determination of methoxy group content in methylated melamine resin by IR

红外光谱法测定甲醚化氨基树脂中甲氧基含量

Under different test temperature, modification effect of Epoxy resin and its content was judged upon viscous-elastic characters of asphalt mixtures.

在不同的试验温度下，考察了环氧树脂及其用量对沥青混合料粘弹特性的影响效果。

by melamine modifying urea-formaldehyde resin the boiling-water resistance is improved and the free formaldehyde content decreased.

用三聚氰胺改性脲醛树脂改善了胶粘剂的耐沸水性,并有效地降低了游离甲醛含量.

In grafting copolymerization, with the epoxy equivalence of epoxy resin increases, the storage stability drops. The film acquires higher hardness degree and tensile strength, lower break elongation and better water resistance at the same time. The best content is 7-10%.

共聚法合成的复合乳液中，随着环氧树脂的环氧当量升高，乳液的贮存稳定性下降，涂膜硬度增大，拉伸强度增大，断裂伸长率下降，涂膜的耐水性变好，环氧树脂用量应控制在7&10%。

The monomer ratio, CPE content, swelling time, conversion and the amount of mercaptan would also affect the light-trasmitting property of MCS resin.

单体配比、CPE用量、溶胀时间、转化率及硫醇用量等均有影响。

But the thermal resistance of resin enhanced when urea content was increased.

但随着脲基含量的增加，树脂的耐热性提高。

The low viscosity and good flexibility epoxy acrylate with different molecular weight and content was successfully prepared by firstly making modification of epoxy resin with maleic anhydride and polyethylene glycol monoester, and then modified epoxy resin react with acrylic acid.

采用马来酸聚乙二醇单酯对环氧树脂进行改性，然后用丙烯酸酯化，制得光固化涂料用一系列低黏度、柔韧性好的环氧丙烯酸酯。

The flowing activation energy of epoxy resin system declined obviously with the content of reactive fluorinated diluent added.

随着含氟活性稀释剂的增加，环氧树脂体系的流动活化能明显下降。

Macroporous resin purified the saponins. UV spectrophotometric is used to assay saponin content after the vanillin acetic acid-perchloric acid color reaction when the standard substance is Astragaloside.

大孔吸附树脂纯化皂苷，以黄芪甲苷为对照品，香草醛乙酸&高氯酸显色反应后，紫外分光光度法测定皂苷含量。

Influence of additives on the content of amino end group of PA 6 resin

改性剂对PA6树脂末端氨基含量的影响

Study of synthesis method of UF resin with low formaldehyde content

低甲醛含量脲醛树脂粘合剂的合成方法研究

The effects of the type of main rubber, the type and content of tackifying resin, modifying resin and filler on properties of sealant were discussed.

研究了主体树脂品种、增粘剂、改性剂、填料的类型及用量对材料性能的影响。

In this paper, the application of tackifying resin for SBS modified adhesive was studied, including the effect of the kind of tackifying resin and its content on stripping strength of the resulted adhesive and its adhesive property on some shoes materials.

研究了增粘树脂在SBS改性胶粘剂中的应用，其中包括增粘树脂品种、用量对胶粘剂剥离强度的影响，同时研究了该胶粘剂对各种鞋材的粘结性。

Effects of reaction conditions on the molecular weight and methylol group content of the resole resin were studied, and the composition of the plate's thermo-sensitive layer was also studied.

研究了合成反应条件对可熔性酚醛树脂的相对分子质量和羟甲基指数的影响及该版材的热敏涂层配方。

The measures to prevent nitrogen blow hole caused by high nitrogen content of resin sand are: adopting low nitrogen resin, adding iron oxide into sand or coating and keeping resin from moisture.

防止树脂砂含氮量高引起的氮气孔的方法是：选用低氮树脂、型砂或涂料中加入氧化铁粉和避免树脂受潮。