resin content的例句大全

After added into soil, the moisture absorbing ability of resin decreased abruptly, resulting in less soil water content increment than expected.

保水剂拌入土壤后，其吸水能力明显降低，表现为理论含水量明显低于实测含水量。

The distributing gradient of nano-SiO_2 in the coating is larger when the nano-SiO_2 content or its molecular weight or graft ratio or the polarity of host resin is larger.

当纳米SiO2粒子含量较高、分子量较小、接枝率较高，或者在极性较大的基体树脂中时，迁移较快，分布梯度较大。

mutual correlation between the rotation value and main content of resin acids in distillation processing;

蒸馏过程中比旋值和主要树脂酸含量的相关规律；

experiments were made by different methods of microwave plasma processing on curing time, application period, bonding strength and free formaldehyde content of uf resin.

试验结果表明：等离子处理对脲醛树脂胶粘剂的固化时间和适用期的影响不明显；

textile glass fibre preimpregnates - test method for the determination of the resin and fibre content and mass of fibre per unit area

纺织玻璃纤维预浸渍.测定单位面积树脂、纤维含量和纤维质量的试验方法

Spectrophotometric determination of free isocyanate-group (-NCO ) content in polyurethane resin production is studied.

本文研究了分光光度法测定聚氨酯树脂生产过程中剩余— NCO 含量的方法.

Effects on initiator, reaction temperature, reaction time, monomer content tackifying resin on adhesive properties are investigated.

探讨了引发剂用量 、 反应温度 、 反应时间 、 增粘树脂对胶液性能的影响.

When the content of 3wt% silane-treated barium glass filler reached 40wt%, simultaneously added 3wt% nano-sized silic into resin matrix, the experimental composite obtained optimal mechanical properties and suitable viscosity. 5.

当3wt%硅烷偶联剂处理后的钡玻璃填料在树脂体系中含量达到40wt%，同时加入3wt%的二氧化硅纳米填料，可以获得较佳的复合树脂力学性能和适合的树脂体系粘度。

Relationship between resin binder content and properties of automotive friction materials

树脂粘结剂含量对汽车摩擦材料性能的影响

Adding 4.0% YZ-1 could make the content of free formaldehyde reduce to 0.22% when the initial content of free formaldehyde in the resin was 2.00%-6.00%.

当初始游离甲醛含量在2.00%-6.00%时，YZ-1的施加量为4.0%，可使游离甲醛含量降至0.22%。

Phenol content in wastewater effluent of resin or additive plants exceeding the national criteria hard to control is an urgent problem.

合成树脂及其添加剂的生产的排放废水，苯酚含量超过国家规定排放标准且难以控制的问题亦急待解决。