rolling temperature的例句大全

At the same time , effects of rolling temperature and deformed amount on austenite grain size mill.

在轧制温度一定时,变形量和钛含量增加,奥氏体晶粒尺寸减小.

It is found that the compactness, rolling temperature and pass reduction play a significant role in rolling properties of the composites.

研究表明，材料的致密化程度、轧制温度、轧制过程中道次压下量对材料的轧制性能有着重要影响。

The bonding strength decreased with the reduction ratio and the rolling temperature.

叠层复合材料的结合强度随压下率和轧制温度的增大而降低。

the effects of processing parameters of tmcp, such as finish rolling temperature and coiling temperature on microstructure and mechanical properties of low c-mn steel were studied by tmcp tests.

通过TMCP工艺实验，研究了终轧温度和卷取温度对低碳锰钢力学性能和微观组织的影响规律。

Research about Rolling Temperature Automatic Control Technology in High Rate Thin Strip Cold Tandem Mill

薄带高速冷连轧轧制温度自动控制技术的研究

Effects of finish rolling temperature on ratio of yield to strength in high strength pipeline steel

轧后控冷终冷温度对高强度管线钢屈强比的影响

The effects of rolling temperature, pass reduction on the interfacial bonding strength were researched; and the effect of the subsequent annealing process on the interfacial bonding strength and the joint interface structure were investigated.

研究了轧制温度、压下率对复合板的结合强度的影响，以及轧后退火工艺对复合板的结合强度及界面结构的影响；探讨界面结合机理，确定出最佳工艺方案。

When Nb content was 0.014 ( mass,%), finish rolling temperature was 780 ℃ and coiling temperature was 400 ℃, retained austenite fraction, carbon contents of retained austenite, Vickers-hardness and tensile strength have the optimum combination.

铌含量为0.014%、终轧温度为780℃、卷取温度为400℃时，残余奥氏体量、残余奥氏体相中的碳含量与宏观维氏硬度和抗拉强度具有最佳组合。

The mathematical model in heating furnace is set up for calculating billet tapping temperature according to billet heterogeneity, specification and opening rolling temperature.

根据钢坯的种类、规格、开轧温度，通过建立的数学模型计算了钢坯的出炉温度。

technological experiment on production of high pressure boiler pipe with final rolling temperature controlled

控制终扩温度生产高压锅炉管的工艺试验研究

Effect of Controlled Rolling Temperature Interval on Microstructure and Mechanical Properties of Hot Rolled Nb-Contained Multiphase Steel

控轧温度区间对含Nb热轧多相钢组织和性能的影响

Rough rolling and pure rolling temperature drop model is derived by regression statistics way with the measured data, can see this model has good prediction, forecast and actual temperature temperature ± 15% than basic error.

粗轧和精轧的温降模型通过回归统计的方式导出，与现场的实测数据比较，可以看出该模型具有很好的预测度，预测温度与实际温度的误差基本不超过±15%。

The experiments show the end rolling temperature has great effect on the yield strength, and the low magnetic steel can meet the requirement of users without adding trace element when end rolling temperature is 700-800 ℃.

试验表明：终轧温度对屈服强度有较大的影响。在700℃～800℃时不添加微量元素强度也能满足用户要求。

On the basis of investigating influence of the technological parameter such as slab reheating process, furnace scale structure characteristics, scale removal times and rolling temperature variation on scale removal, the scale removal technical process rule was had developed and perfected.

通过研究热轧生产工艺过程的板坯加热、炉生氧化铁皮结构特点、除鳞道次、轧制温度变化等工艺参数对除鳞工艺的影响，制定、优化、完善了热轧板卷除鳞工艺制度。

The effect of finishing rolling temperature on banded structure of 16 Mn steel plate

终轧温度对16Mn钢板带状组织的影响

Calculating Temperature Jump During High-Speed Wire Rolling Through Upper Bound Triangular Velocity Field

以上界三角形速度场计算线材精轧温升

Research on Effective Strain in Wire Rod During Rolling and Calculation of Temperature Jump

高速线材精轧的等效应变研究及温升计算

Temperature dropping model research for 900 mm medium-wide strip hot continuous rolling finishing set

900mm中宽带热连轧精轧机组温降模型研究

Moreover, metastable austenite field about temperature interval 180 ℃ occurs on CCT diagram, which provides theoretical basis for dual phase's hot rolling procedures.

此外，该钢的CCT曲线上出现了温度间隔约180℃的奥氏体亚稳区，为实现双相化热轧工艺提供了理论依据。

Computer Simulation of Temperature Drop in Plate before Rolling and during Rough Rolling

轧前及粗轧过程中钢坯温降的计算机模拟