seat ring的例句大全

seat ring is seal welded to eliminate leak path.

阀座环通过密封焊接,消除泄漏通道.

High Integrity Shutoff gate valves can be used for hot tapping or in pipeline services where a soft pig is used if the seat ring installation lugs are removed.

高度完全关闭闸阀可以用在热水龙头，或拆卸阀座环安装吊耳后，用在采用软铁块的管路中。

valve seat insert (valve seat ring)

气门座镶圈（嵌镶式气门座圈）

For highly abrasive applications we can supply a replaceable seat ring with a hardfaced knife surface.

对于具有很强研磨作用的流体介质,我们可以提供具有硬面闸刀表面的可更换阀座环.

Seat ring is progressively crimped on a lathe to imprison the O-ring in it.

在机床上,阀座密封环逐渐起波纹,并将O 形 环束缚在里面.

Trim numbers with H have cobalt alloy hard faced seat ring facing.

带有H的阀内件型号具有钴合金硬面阀座环表面.

Seat Ring – hard faced seat rings are welded to body.

阀座环–硬面阀座环焊入阀体内.

Disc? machined seating surface is mated to seat ring for positive shutoff.

阀瓣 - 机加工阀座表面,配置阀座环,实现积极有效的关闭.

With the retainer wires removed, the seat ring can be lifted straight up and removed.

拆卸固定器线圈后, 阀座环就可以直接取出并拆卸.

The seat ring may be removed and replaced by pulling out the two retainers.

通过取出两个线圈固定器可以拆卸和更换.

the stainless steel seat ring is manufactured with a slight inside taper.

不锈钢阀座密封环制成内部锥度.

Because of its superior performance, the friction in friction application fields become best material, such as sleeve bearing, sliding bearing, the valve seat, seals, pump wear ring, etc.

因其优越的摩擦性能，在摩擦应用领域成为理想材料，如套筒轴承、滑动轴承、阀门座、密封圈、泵耐磨环等。

A new-type electromotive force pot pressure limiting valve, consists of valve bonnet, valve body, thimble, spring, valve eye ring, valve seat, exhaust pipe sealing ring, nut, and exhaust pipe.

一种新型电压力锅限压阀，包括阀盖、阀体、顶针、弹簧、阀提手、阀座、排气管密封圈、螺母、排气管。

To replace seat module, pull out of body by gripping at reinforcement ring.

为了更换阀座模块, 通过抓住加强环将其拔出阀体.

TFE seat kits and O-ring kits are available for all True Union style valves.

对于所有TrueUnion类型的阀门,可提供TFE阀座 组件和O形环组件.

TFE seat kits and O-ring kits are available for all True Union style valves.

对于所有TrueUnion类型的阀门,可提供TFE阀座 组件和O形环组件.

The sphere and valve seat is completely separated to eliminate wear of seal ring.

球体和阀座完全脱开,消除密封圈的磨损.

Kit includes: Seat, Seat oring, Retainer Wire and Cover O ring.

组件包括: 阀座, 阀座O形环, 固定器线圈和阀盖O形环.

The utility model is composed of a top-sucking disk, a hanging chain, a decorative cap, a supporting rod seat, a supporting rod, a circular ring, a lamp holder arranged on the supporting rod, etc.

具有吸顶盘、挂链、装饰盖、撑杆座、撑杆、圆环，以及设置于撑杆上的灯座等构成。

A screwdriver is used to remove the spiral seat retainer ring from its groove.

采用一把螺丝刀从凹槽中拆卸螺旋阀座定位器环.