shear angle的例句大全

In our dataset, 53% of the active regions in the south hemisphere have positive shear angle and 62%

磁场剪切角具有南北半球符号的反对称手征性，在南半球有53%的活动区的磁场剪切角是正的，而在北半球有62%是负的。

The mechanisms of semi-periodic variation of chip thickness were discussed, and combining with shear angle changing and dynamic behaviour of microcracks, models of chip forming process were established for SiC_p/ Al composites with different reinforcement volume fraction. 2.

探讨了切屑厚度准周期变化的内在机制，将剪切角周期变化和微裂纹的动态影响相结合，建立了适应含不同颗粒体分比的该材料的切屑形成过程模型。

New Methods on the Determination of Martensitic Transformation Shear Angle and Lattice Parameters;

马氏体相变切变角和点阵常数测定的新方法◆剪切角可调，减少板料扭曲变形。

Specific executions of the fly-shear angle calculation, skin-pass mill control, line speed and tension control designed in the typical control design have been deliberately described, which is valuable for the domestic industry applications.

在典型控制方案论述中对飞剪角度计算和控制、平整机控制及机组速度、张力控制等给出了具体的实施过程，在国内同行业具有较好的应用价值。

The sliding frictional resistance on the shear deformation zone increase with angle ψ.

试样在剪切变形区所受到的滑动摩擦力也随ψ角的增加而增大。

A series of factor such as the difference about the centre of figure and the shear centre, curvature radius, central angle is discussed. Sometimes it is better to locate the force half-way between the centroid and the shear centre.

对曲线梁中的剪、形心位置的差异以及曲率半径、圆心角、预应力大小、摩阻损失等内力影响因素进行了分析。有时，荷载作用在形心与剪心距离的一半处较为有利。

The conditions that the most story drift angle of interruptable shear wall height are established.

设定了最大层间位移角θmax为可中断剪力墙的条件。

Although the shear strength of frozen clay is only increasing with the temperature decreasing, there is a tendency that the angle of internal friction is dropping with the lowering of temperature.

无论何种试验加载方式，冻结粘土的剪切强度都与围压关系不大，只随着温度的降低而增大，而内摩擦角则有随着温度的降低而减小的趋势。

Slide-resistant pile program has realized these fuctions which are given slip surface count internal friction angle, given the shape of sliding surface design calculation, given the landslide thrust design calculation of landslide, given sliding surface moment, shear force design calculation. 5.

抗滑桩程序设计，实现了对给定滑动面形状反算内摩擦角、给定滑动面形状进行设计计算、给定滑坡推力进行设计计算以及给定滑动面处弯矩、剪力进行设计计算的功能。

The differences among peak shear strengths in three directions are analyzed. Test results show the angle of internal friction is 42 ° and cohesion is 700 kPa in ice temperature-6.2 ℃.

分析了不同加载方向海冰峰值剪切强度的差异，获得-62℃温度下S2冰内摩擦角和内聚力分别为42°和700kPa。

The shear strength parameters are reduced than those were not under the cyclic load. And under the same cyclic load, the reduction factor of cohesion is larger than the reduction factor of the angle of internal friction.

经过循环荷载作用的抗剪强度参数均比未受循环荷载作用的指标有所折减，而且在相同循环荷载的作用下，粘聚力折减系数比内摩擦角折减系数大。

Whether shear instability occurs or not, some parameters, such the length of specimen, shear elastic modulus, shear softening modulus, internal length parameter ( or the width of shear band) and the inclination angle of shear band, play important roles.

岩样系统是否将发生剪切失稳破坏，关键取决于：岩样高度、剪切弹性模量、剪切降模量、岩石材料内部长度参数及剪切带倾角。

Based upon the gradient-dependent plasticity, a model of size effect of the inclination angle of the shear band was put forward. The theoretical result compares well with experimental results.

建立了准脆性材料试件剪切带倾角尺度效应模型，得到了剪切带倾角尺度效应的解析解，且与实验结果比较相符。

It has been confirmed that sufficient structural strength is one of the conditions for the formation of shear band for structured clay. Inclination angle of the shear band is not in accordance with Roscoe ′ s theory.

结果表明：土体具有足够的结构强度是剪切带形成的条件之一，剪切带的倾角与Roscoe理论不相符；

The shearing ability is improved by changing the shearing angle of the middle plate shear from 3 ° 30 ′ to 3 ° 45 ′, by theoretical analysis and the safety space of the shear is defined by simulation analysis.

通过理论分析，将某厂中板剪切机的剪刃倾角由3°30′改为3°45，′提高了剪切能力，并经过仿真分析确定了剪切机具有较大的安全裕量。

The axial and lateral plastic strains are concerned with the compressive stress level, the inclination angle and the thickness of shear band, the softening modulus, and the geometrical size of rock specimen.

试样的轴向塑性应变及侧向塑性轴向应变由梯度塑性理论确定，它们与应力水平、剪切带倾角及宽度、软化模量及试样的尺寸有关。

The relation between the stability of rock bedded slope and the dip angle of strata or the shear strength of joint is also explained.

同时也阐明了岩层倾角以及结构面抗剪强度对顺层岩质边坡稳定性的影响。

In this paper, generation and development of impacting wave in π/ 2 angle wedge in case of shear pulse with constant velocity have been investigated by means of the methods of self-similarity and complex function in elastodynamics.

本文利用弹性动力学中的自相似方法和复变函数论方法，研究了在脉冲匀速运动剪切载荷作用下π/2角楔形弹性体中冲击波的形成和发展。

A direct shear apparatus development for grain internal friction angle measurement

测定粮食内摩擦角的直剪仪研制

Hamilton System and Symplectic Geometry Algorithms for the Shear Deformable Angle ply Laminated Plates

考虑剪切效应层合板的Hamilton体系及辛几何方法