shear beam的例句大全

finite element analysis of double-shear beam load cell

双剪梁型称重传感器的有限元分析

Single shear beam, Alloy steel, Nickel plated, Melted sealed, High quality.

单剪梁 、 合金钢 、 镀镍 、 全密封焊接、高精度、高可靠性 、 稳定性好、抗偏载能力强.

Double shear beam load cell , used for electronic platform scales, batching scales and industrial weighing system.

双梁式结构 、 应用于电子台秤 、 配料秤等工业秤重系统.

analysis on hysteresis of double& shear beam load cell

双剪切梁式称重传感器滞后误差分析

It includes shear beam type, bending beam, single type, canister type and so on.

它包括剪切梁式, 弯梁, 单一型, 筒型等.

By using the knowledge about shear diagram, moment diagram and extreme value of quadratic function, this paper discusses on the calculating method of maximum shear and maximum moment of simple-supported beam under moving loads.

应用剪力图、弯矩图和代数二次函数极值的知识，对简支梁受移动载荷作用时最大剪力和最大弯矩的计算方法进行了论证。

The joint of slab and column has good resisting shear capacity when the hidden beam is placed in the floor.

暗梁的布置使板柱节点具有良好的抗冲切能力。

Through integrating the steel girder and the concrete slab with shear connectors, steel-concrete composite beam has been widely used in the structural and bridge engineering.

钢-混凝土组合梁是钢梁和混凝土板通过剪力连接键连接而成的组合结构，在现代结构和桥梁工程中得到了广泛的应用。

Experimental research on shear behaviors for RC beam with pre-stressed stirrups

预应力箍筋加固RC梁受剪性能试验研究

Experimental Study and Application for Coupling-Beam Damper of Shear Wall Structure

剪力墙结构连梁阻尼器试验与应用研究

Shear behavior of reinforced concrete beam with high-strength stirrup under concentrated load

集中荷载下高强箍筋混凝土梁的抗剪性能

in the analysis, the stiffness and inertia of the piezoelectric element and bonding layer are included as well as the shear formation and rotary inertia of the beam.

在分析时考虑到压电元件、粘贴层、梁的剪切变形和转动惯量。

The thin wall beam considering shear dint hysteresis effecting geometry matrix deduce

薄壁箱梁考虑剪力滞效应几何刚度矩阵的推导

The structure of frame-supported shear wall with the beam style transfer story has been widely used in the tall buildings in China.

带梁式转换层框支剪力墙结构已被广泛应用于我国的高层建筑中。

The bending moments and the axial forces are separately considered according to little deformation theory and the principle of superposition. Energy differential method is adopted to solve the shear lag effect of the cable-stayed bridges caused by the bending moments, where the beam-column effect is considered.

根据小变形理论和叠加原理，将弯矩和轴力作用分开处理，利用能量变分法来求解弯矩和轴力共同作用下的剪力滞效应，在分析弯矩作用时考虑了梁柱效应。

At the same time, different influences on node performance about different stiffened plate, beam web thickness, beam web height, concrete strength, axial compression ratio, shear span ratio are also obtained.

同时，通过建立不同的模型进行计算，分析了加劲板、型钢腹板厚度、型钢腹板高度、混凝土强度、轴压比、剪跨比等因素对节点性能的影响。

The shear performance experimental study of concrete beam reinforced by onlay CFRP batten

嵌贴CFRP板条加固混凝土梁抗剪性能试验研究

The vertical beam shear and the bending force calculation; The Plotting of the Shear Force Diagram by the Graphic Method

用图解法作梁的剪力图和弯矩图

Analysis on the beam bars anchorage mode and performane detail in exterior shear wall joints

剪力墙中间层端节点梁筋锚固方式及锚固性能探讨

In actual structural design, section dimensions of the transfer beam are at the mercy of bearing capacity for shear.

实际结构设计时，转换梁的截面尺寸往往是由受剪承载力决定的，而转换梁中对支座区段的截面受剪承载力要求往往远远高于对跨中区段的截面受剪承载力要求。