shear beam

This method can not only be used to draw shear force diagram quickly, but also to determine the shear sign automatically, and to verify the reaction force of multi-span beam.

该方法不但能快速绘制剪力图，而且自动确定剪力符号，兼可对多跨梁的支座反力进行校核。

It includes shear beam type, bending beam, single type, canister type and so on.

它包括剪切梁式, 弯梁, 单一型, 筒型等.

Double shear beam load cell , used for electronic platform scales, batching scales and industrial weighing system.

双梁式结构 、 应用于电子台秤 、 配料秤等工业秤重系统.

Deflection Calculation of Tapered Beam with Shear Effects by Energy Method

考虑剪切变形影响时变截面梁的挠度计算

The vertical beam shear and the bending force calculation; The Plotting of the Shear Force Diagram by the Graphic Method

用图解法作梁的剪力图和弯矩图

This thesis carries out the pseudo static test, which are subjected to vertical loads and horizontal cyclic loads, respectively on two specimens, including the framed short-leg shear wall inclined column-shaped transfer plane framework and the same dimension beam-shaped transfer structure frame.

本文分别对一榀框支短肢剪力墙斜柱式转换框架及一榀相同尺寸的梁式转换框架两个试件进行了竖向荷载和水平低周反复荷载共同作用下的拟静力试验。

The beam is named as accentual transfer beam if the translated shear wall ( or the column) isn't on the axle of the transfer beam.

被托换的剪力墙（或柱）不在转换梁的中轴线上，这时的转换梁就是偏心转换梁。

A deep beam model with spring bearing is given, based on the analysis of middle frame of frame and shear wall structure ground floor. Comparing rigid assumption to elastic assumption, shear error of frame is worked out, which is index of floor rigidity.

从按刚、弹性楼板计算框剪结构的底层中间框架柱剪力误差值的分析入手，建立了一个由弹簧支承的水平深梁的模型。

Analysis of free vibration for tapered beam including effects of axial force and shear deformation

考虑轴力和剪切变形影响的楔形梁自由振动分析

The flexural deformation was main before the test beam cracked, while shear effect was less.

混凝土开裂前，构件的剪切变形较小，主要以弯曲变形为主。

Single shear beam, Alloy steel, Nickel plated, Melted sealed, High quality.

单剪梁 、 合金钢 、 镀镍 、 全密封焊接、高精度、高可靠性 、 稳定性好、抗偏载能力强.

The bending moments and the axial forces are separately considered according to little deformation theory and the principle of superposition. Energy differential method is adopted to solve the shear lag effect of the cable-stayed bridges caused by the bending moments, where the beam-column effect is considered.

根据小变形理论和叠加原理，将弯矩和轴力作用分开处理，利用能量变分法来求解弯矩和轴力共同作用下的剪力滞效应，在分析弯矩作用时考虑了梁柱效应。

By using the knowledge about shear diagram, moment diagram and extreme value of quadratic function, this paper discusses on the calculating method of maximum shear and maximum moment of simple-supported beam under moving loads.

应用剪力图、弯矩图和代数二次函数极值的知识，对简支梁受移动载荷作用时最大剪力和最大弯矩的计算方法进行了论证。