shell temperature的例句大全

The influences of pyrolysis temperature and heating rate on charring yield and decomposition rate of coconut shell were also explored.

作者还探讨了椰壳热解温度、升温速度对其炭化得率、分解速率的影响。

Numerical Analysis of Surface Temperature and Solidified Shell Thickness of Round Billet for Wheels

车轮钢圆坯表面温度和坯壳厚度的数值分析

the experiment adopts maize powder, chaff shell, the sawdust and wheat bran. amount of material entered is 5-10kg/ h, the quartz sand is adopted as the hot carrier and regard nitrogen as flow medium. the pyrolysis temperature is 500 ℃.

实验用生物质主要采用玉米粉、糠壳、锯末及麦麸，设计进料量5-10kg/h，采用石英砂作为热载体，以氮气作为流化介质，设计热解温度500℃左右。

the outer part of the metal shell is fixed with a temperature display screen connected with the control circuit.

所述金属壳体的外部固定有与控制电路相连接的温度显示屏；

the results indicate that gas holes in metal shell can be eliminated by the increase of the preheating temperature of cast mold.

结果表明：提高铸型预热温度可以完全消除无气孔金属壳；

Large cooling capacity, metal shell, suit terrible environment, such as high temperature, low temperature and big vibration, etc.

制冷量较大，全金属壳体，适用于高、低温，震动大的恶劣使用环境。

Research on the Dimension Compensation of the Bearing and the Shell Holes Mate with the Temperature Rising

壳体孔与轴承配合的温升尺寸补偿研究

The effects of storage temperature on fatty acid oxidation of pine nut kernels with or without shell

不同贮藏温度对不同状态松籽种仁脂肪酸氧化的影响

Calculations of pipe end thrust ( moment) applied by tower top effluent pipe, the loads caused by temperature difference between axial and radial of tower shell, and between the connecting pipe and adjacent portion of tower shell are carried out.

对焦炭塔堵焦阀接管部位分别进行了在塔顶馏出管线所作用的管端推力（矩）以及塔体轴、径向温差和接管与塔体连接区域温差载荷下的应力计算。

In order to study the variation of shell effects as well as pairing effects with nuclear temperature, we have extended the work of Sano and Yamasaki to generalize the HFB equations to finite nuclear temperature with the help of variational principle.

为了研究壳效应以及对效应随核温度的变化，我们借助于变分原理扩展了Sano和Yamasaki的工作，把HFB方程推广到核温度不为零的情况。

The preferred polymerization conditions were that seed polymer temperature 80 ℃, pre-emulsion distribution droplets time 1.5 h, shell polymerization temperature 75~ 80 ℃, distribution droplets time 5 h.

较佳的聚合工艺为：种子聚合温度80℃，预乳化液滴加时间15h；壳层聚合温度75～80℃，滴加时间5h。

The liquefaction of coconut shell in phenol was studied. The effects of catalysts, different content of sulphuric acid, reaction temperature, phenol: powder ratio, reaction time on the content of residue and combined phenol of the products of liquefaction were discussed in detail.

研究了催化剂种类、浓硫酸催化剂用量、液化反应温度、苯酚与椰子壳质量比、液化反应时间对液化产物残渣率及结合酚的影响。

Mould Tapping Temperature is essential parameter for steel shell.

结晶器出钢温度是结晶器内钢水坯壳厚度判别的一项重要衡量指标。

adjustment of responsive temperature and loading behavior of temperature-sensitive core-shell micelles prepared via in-situ polymerization

原位聚合法制备温敏性聚合物核壳胶束的响应温度调控及其负载行为

the pressure detecting element and the temperature measuring element share the probe at the bottom part of the shell.

压力探测元件和温度测量元件共用壳体底部的探头。

analysis of thermal expansion stress and temperature difference stress for bof shell

转炉炉壳热膨胀应力和温度差应力的分析

preparing the ovality analysis: measuring the temperature of kiln shell and tyre, resp.

椭圆度测量的准备工作：测量相应的窑筒体和轮带温度。

an ir-based real-time on-line monitoring system for the temperature of kiln shell

基于红外技术的窑胴体温度实时在线监测系统

application of monitoring system of temperature scanning on rotary kiln shell

回转窑筒体温度扫描监视系统的应用

analysis of surface temperature image of kiln shell

窑简体表面温度图像的分析