sintering temperature的例句大全

In the most appropriate range of sintering temperature for feldspathic ceramics, sintering time should be prolonged appropriately ( 5 hours) to increase the content of leucite crystals.

长石瓷有一最佳的烧结温度范围，在此范围内，适当延长保温时间（5小时）有利提高长石瓷中白榴石的含量。

now, it is an urgent need for electronic ceramic industry to solve the problem that insulative materials must be obtained at low sintering temperature.

低温烧结绝缘材料是当前电子陶瓷行业迫切需要解决的问题之一。

Sintering temperature was 150 ℃ lower than the traditional powders.

与普通粉末相比，烧结温度降低了150℃。

The comparison shows that the thermal etching carried out at a temperature lower than the sintering temperature can obviously reveal the grain structure of Al_2O_3 matrix. The metallic particles after thermal etching were not moved away from the samples, as normally occurred in chemical etching.

比较表明，在低于烧结温度约150℃下进行的热腐蚀能够清晰地揭示基质Al2O3的晶粒结构，并且与化学的效果不同，保留了金属相粒子。

Study of Sintering Temperature of HN-97 Porcelain Stain

烤瓷牙外源性着色剂HN-97的烧结温度研究

influence of sintering temperature on the formation and properties of ba-bearing calcium sulfo-ferritealuminate minerals

烧成温度对硫铁铝酸钡钙矿物形成和强度的影响

Relation between Sintering Temperature of Cathode Blocks and Versus Oxygen Concentration in Electrolytic Tantalum Powders

阴极块烧结温度与电解钽粉氧含量的关系放电等离子烧结制备铁基大块非晶材料

Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature.

性能特点:1.曝气盘采用氧化铝磨料和陶瓷结合剂高温烧结而成.

There are a minimum value of the porosity and a maximum value of the thermal conductivity in the sintering temperature range.

在烧结温度范围内随着气孔率出现最小值时，导热系数出现最大值。

Effect of staining method and sintering temperature on the color of porcelain-fused-to-metal restorations

染色方式及烧结温度对金瓷修复体颜色的影响

The sintering temperature and thermal expansion coefficient of the LSGM sample were determined using dilatometer.

用热膨胀仪确定了LSGM的烧结温度及热膨胀系数。

Improving sintering temperature is conducive to the blue emission. Annealing makes UV emission peak of the film happen blue-shift and blue-ray emission peak happen red-shift.

提高灼烧温度有利于提高薄膜样品的蓝光发射，退火使薄膜的紫外发光峰发生蓝移，蓝光发光峰发生红移。

The results show that the original boundaries vanish when sintering temperature is above 1250 ℃.

结果表明：在1250℃以上烧结时，烧结体中原粉末颗粒边界消失；

The ceramic grain grows bigger with the rise of the ceramic sintering temperature.

随着烧结温度的升高，陶瓷晶粒的尺寸增大。

The main reason is that with the sintering temperature increase, liquid content increase but porosity reduce.

主要的原因是随着烧成温度的升高，液相含量增加和气孔率减少。

Its optimum sintering temperature is 1550 ℃, holding time 1. 5h.

其最佳烧结温度为1550℃，1.5h。

These factors were mainly discussed: chemical composition and sintering temperature.

讨论了化学组成、热处理温度对材料的影响。

Effect of sintering temperature on microfiltration membrane prepared with TiO_2 ceramic-fiber

以TiO2纤维制备微滤膜过程中烧结温度的影响

Regular reaction sintering occured only as the heating temperature is lower than 1 173 K for thermo explosion reaction.

当温度尚未达到热爆温度时，只能发生常规反应烧结；

The prepared porous material manufactured by elemental powder solid phase diffusion followed by high temperature reaction sintering process had excellent comprehensive performance.

采用元素粉末固相扩散+高温反应烧结工艺所制备的多孔材料具有优异的综合性能。