sintering temperature的例句大全

study of temperature control technology of selective laser sintering system

选择性激光烧结系统自动控温工艺的研究

the study of the preheating temperature for selective laser sintering forming machine

选择性激光烧结成形机预热温度的研究

research of the relationship between laser power density and temperature compensation in selective laser sintering

选择性激光烧结激光能量密度与温度补偿规律研究

simulation and test of transient temperature of selective laser sintering

选区激光烧结瞬态温度场模拟与测试方法研究

At high temperature uses are: sintering, welding, hardening, sintering, tempering, Xu cold.

在高温下使用用途有: 烧结 、 焊接 、 淬火 、 烧成 、 回火 、 徐冷.

The agglomeration and sintering of fine particles can necessitate a lowering in temperature of operation.

由于微粒易于聚集和烧结,不得不降低操作温度.

High temperature microscope for glass analysis of sintering, surface tension, softening point, melting and compatibility.

高温显微镜,用于烧结, 表面张力, 软化点, 融化和兼容的玻璃分析.

Neural network model of burn through point temperature and ventilating index algorithm for sintering system

烧结系统终点温度与透气性算法神经网络模型

Current Research for Low Temperature Sintering of Boron Carbide Ceramics

碳化硼陶瓷低温烧结技术的研究现状

The results show that single-phase CZP powder is synthesized at 700 ℃ by the chelate-sol-gel method, which shows good sintering activity at a low temperature;

结果表明：络合溶胶-凝胶法合成的前驱物经700℃煅烧能得到单相CZP粉体，该粉体具有良好的低温烧结活性。

It can significantly reduce the energy cost and realize the purpose of sintering conventional high-porcelain temperature.

降温节能效果显著,实现了传统高级瓷器低温烧结之目的.

This paper presents a technical review of material characteristics of different systems of ZnO low-voltage varistor ceramic, as well as a reexamination of low temperature sintering technologies used in the fabrication of low voltage ZnO varistor ceramic.

本文详细介绍了不同体系的ZnO低压压敏电阻材料特点及各自的局限性，并且对ZnO压敏电阻向低压化发展趋势下出现的材料低温烧结技术进行了评述。

made of shaping polytetrafluorethylene resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成.

In one set of joint-body firing furnace, by varying the temperature and atmosphere in great gradient, the reduced sintering and oxidized treatment of the semi-manufactured goods were carried out continuously.

在一台联体烧成设备中，采用大梯度温度和气氛变化，连续完成还原烧成和氧化处理。

Making use of multi-media technique, with computer science, image theory and radialization theory applied comprehensively, a system is developed that makes on-line measuring of the material quantity and temperature of sintering belt in the cement kiln practicable.

利用多媒体技术，将计算机与图像处理理论、辐射传热理论相结合，实现连续实时对水泥回转窑烧成带物料量和温度的在线检测。

High Temperature Sintering and High Temperature Annealing of WC Dispersion Strengthened Copper

碳化钨弥散强化铜的高温烧结及高温退火

The temperature fluctuation should be avoided during sintering process.

在1000℃连续烧结5至6天，烧结过程中，应尽量避免温度波动。

Though this research, we analyse the seperating phenomenon of PDC and performance improvement on the belt press. This research shows: the pressure and temperature homogeneity on the sintering in superhigh pressure effect performance of PDC directly.

通过分析在两面顶压机上造成金刚石复合片分层现象的原因并加以改进，实验结果表明：超高压腔体中各点压力和温度在烧结过程的均匀性直接影响PDC的性能。

The measuring result of temperature curve to three kinds of typical ceramic tunnel kilns are demonstrated in this article. The temperature and atomospheric homogeneity in the tunnel kiln are also analysed theoretically and finally the major improvement and existing problems to the sintering homogeneity are indicated.

本文列出三种典型陶瓷隧道窑温度曲线的测试结果，并对温度及气氛均匀性进行理论分析，指出现代陶瓷隧道窑烧成均匀性的重要改进及尚存在的问题。

Effect of Temperature and Atmosphere on Sintering State of Honeycomb Segment Powder

温度和气氛对蜂窝篦齿粉末烧结状态的影响研究