sintering temperature的例句大全

The Workmanship of Thermal Spray Coating Medium Temperature Reactive Sintering

热喷涂层的中温反应烧结工艺

In this paper, the non synchronous phenomenon of temperature distribution in space and time in compact metal power sintering are discussed, it indicate that the gradient design for thermal spray coating sintering is necessary.

讨论了均匀粉末压坯烧结时因热传导而产生的温度分布存在时间和空间上的异步现象，阐明了涂层烧结时梯度设计的必要性。

Study of Sintering Process Thermal State Based on Side-Ρ late Temperature Measurement

基于侧板测温的烧结过程热状态研究

The condition of temperature at 1450 ℃ was satisfied for reaction sintering.

烧结温度选择在1450℃附近，就可满足烧结反应的需要。

The prepared porous material manufactured by elemental powder solid phase diffusion followed by high temperature reaction sintering process had excellent comprehensive performance.

采用元素粉末固相扩散+高温反应烧结工艺所制备的多孔材料具有优异的综合性能。

Regular reaction sintering occured only as the heating temperature is lower than 1 173 K for thermo explosion reaction.

当温度尚未达到热爆温度时，只能发生常规反应烧结；

The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.

通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。

Study on the Characteristics of Composition Distribution at the Interface of Thermally Sprayed Ni-Al Coating Formed by Reactive Sintering at Median Temperature

Ni-Al涂层中温反应烧结界面成分分布特性的研究

Development of SG Polishing Powder by High Temperature Sintering

高温烧结刚玉SG抛光微粉的研制

Fuzzy control system for temperature of sintering shaft furnace

烧结竖炉燃烧室温度模糊控制系统

Realization method of fuzzy control system for sintering shaft furnace temperature is introduced.

介绍了烧结竖炉燃烧室温度模糊控制系统的实现方法。

the average yield and ultimate strengths and elongation of sic_p/ 6066al increase by a factor of 82%, 65% and 300% respectively, compared with the sic_p/ 6066al fabricated by the same process just with short time stepped sintering at high temperature.

材料的平均屈服强度、抗拉强度、延伸率与工艺相同但采用高温短时烧结相比，分别提高了82%，65%和300%。

The system measures pressure drop through the material column to determine the onset temperature for the sintering of bituminous rock.

根据达西定律设计了沥青岩输送特性实验系统，该系统利用压降法测量沥青岩的初始粘结温度。

In this paper, side-plate temperature is measured continuously, and software system of thermal state model in sintering process is developed.

本研究通过连续测量烧结机台车侧板温度，开发烧结过程热状态模型系统软件，对烧结过程热状态进行实时判断与分析，在线指导烧结生产，具有重要的理论意义和实用价值。

The development of thermal state model based on side-plate temperature measurement and the application of this software system provide a new way in the research of thermal state of sintering process. And it has a bright prospect of application.

基于侧板测温的热状态模型的开发及系统软件的应用为烧结过程热状态的研究提供了一条新的途径，具有广阔的应用前景。

The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated.

分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。

Sintering is the key processes in horniness alloy production, in which the temperature control is the key factor to guarantee the product quality.

硬质合金烧结是硬质合金生产的关键工序，烧结过程中的温度控制是保证硬质合金生产质量的关键。

Development of Porcelain Rich in Aluminium by Low Temperature Quick Sintering Process

泵用高铝陶瓷低温快速烧结的研制

Sintering time becomes short along with the milling time. Due to many of atom diffusion channels during secondary heating, the heating temperature required for liquidizing of grain boundaries and spheroidizing of grain surfaces is low and the holding time becomes short.

在二次加热过程中，原子扩散通道多，晶界液化及颗粒球化所需的加热温度低，等温时间短。

Using magnesia as main starting material and adding appropriate amount of low and intermediate temperature compound sintering agent and super micro powder, with a small oscillation making the substance flow, an unformed material of high density and strength is obtained.

以镁砂为骨料，添加适量的低、中温复合烧结剂和超微粉，在较小的振动力作用下，使物料流动，并获得较高的堆积密度与强度的不定形材料。