solidification process的例句大全

Computer modelling and control of HRS directional solidification process of Ni-base superalloys

镍基高温合金HRS定向凝固过程的计算机模拟及控制

A research on the parameters in incremental melting and solidification process

增分熔融凝固加工工艺参数的探讨

It provide a scientific basis for the electrode melting velocity control and the temperature control of the ingot solidification process, and have a certain value for the actual production.

本文采用的研究方法为目前国内铸造行业研究的热点，为电极熔速的控制和钢锭凝固过程温度控制、结晶器设计等提供了科学依据，对实际生产工程有一定的应用价值。

The dynamic temperature fields of solidification process result in the uneven shrink of every part of castings and cause the thermal bending moment to act on the castings, finally the casting rod yields and deforms.

铸造过程中的动态温度场导致铸件各部位的不均匀收缩，引起了作用于铸件截面的热弯矩，致使杆状铸件挠曲变形；

Temperature Field Simulation of Solidification Process of Damping Barrel in Motorcycle

摩托车减震筒凝固过程温度场数值模拟

Temperature profile calculation in horizontal centrifugal cast cylinder sleeve during solidification process

水平轴离心铸造套筒凝固过程温度场数值计算

Based on the temperature recovery method, a new model is presented to handle the latent heat release of gray cast iron during the solidification process of both primary solidification and the eutectic solidification stages.

基于潜热处理的温度回升法，针对灰铸铁凝固过程中具有初晶和共晶两个阶段的凝固特性，提出了适合灰铸铁的带共晶的潜热处理方法。

By using thermodynamic couple method the temperature field and stress and strain field in solidification process for squeeze casting ZA alloy are analysed.

用热力耦合方法分析了锌铝合金挤压铸造凝固过程中的温度场以及由此产生的应力、应变场。

The numerical simulation of3D temperature field of castings during solidification process was carried out and the shrinkage cavity and porosity of sample castings were predicted using G/ R method.

对铸件开展了凝固过程三维温度场数值模拟，并应用G／R法对铸件进行了缩孔缩松预测。

Study of Thermal Analysis for the Solidification Process of the Hypoeutectic Al-Si alloy

亚共晶Al-Si合金凝固过程的热分析研究

Thermal Analysis of Directional Solidification Process with Liquid Metal Cooling

液态金属冷却法定向凝固试验的热分析

Adopts the Enthalpy method to numerically simulate the temperature field of melting/ solidification process in the surface layer of a stainless steel due to Nd: YAG pulsed laser treatment.

采用焓方法对Nd：YAG脉冲激光导致的不锈钢材料表面熔凝过程的温度场进行了数值模拟。

Using differentiated thermal analysis quenching method, the solidification process of CG cast iron with various percentage of compacted graphite particles is investigated.

本文应用微分热分析液淬法研究了不同蠕化率蠕铁的一次结晶过程。

Instability of flow due to complex heat exchange and density variation leads to strong thermal convection in liquid region during the water solidification process. At the end of solidification process, intensity of flow decayed and the stable structure was rebuilt.

因为存在着复杂的热交换和密度变化，水在凝固过程中存在流动结构失稳，使得液相区内发生强烈的热对流.最后流动强度减弱，重新形成稳定结构。

Coupled Thermo-Mechanical Analysis of the Dimensional Accuracy for the Solidification Process of Casting for Rapid Tooling

RT工艺凝固过程中铸件尺寸精度的热力耦合分析

Thermal study on the steel solidification process in the hot-top of 610 type ingot mould

610型镇静钢锭帽口凝固过程的热工研究

Based on the numerical simulation and real casting experiment, the influence of the slot gate system on the filling and solidification process of the cylindric magnesium alloy casting is studied.

本研究利用数值模拟技术和实际浇注实验研究了缝隙式浇注系统中缝隙宽度、缝隙长度、立筒直径、缝隙形式和冷铁设置等因素对圆筒形镁合金铸件充型和凝固过程的影响。

Optimization of Solidification Process Design for Bulky Steel Casting Based on Finite Element Simulation

基于有限元模拟的铸钢车轮凝固工艺优化

Herein, we studied the effect of three-dimensional rotating magnetic field and alternating traveling magnetic stirring on the solidification process of magnesium alloy and influence of magnesium alloy spiral magnetic stirring in the solidification process of magnesium alloy.

本实验主要研究三维旋转磁场和行波磁场交替搅拌对镁合金凝固过程的影响和螺旋磁场搅拌对镁合金凝固过程的影响。

Numerical Simulation of Temperature Field for Investment Casting Solidification Process

熔模精铸件凝固过程温度场的数值模拟