strain distribution的例句大全

The curve of strain distribution was drawn through computing the strains with Euler coordinate system.

采用Euler坐标进行应变的计算分析，绘出了孔洞周围应变分布曲线。

Using ANSYS stress analysis software to simulate actual stress and strain distribution of test pieces, and then cloud picture and distribution curve is obtained.

使用ANSYS应力分析软件对试件的应力、应变分布进行仿真，得到了仿真云图及分布曲线。

Experimental Study of Stress-Strain Distribution of A Human Skull

人颅骨应力应变分布的实验研究

a hybrid grid method was used to determine the principal plastic strain distribution in a deformed area of a sheet metal piece.

为进一步研究大型覆盖件冲压成形质量分析的技术，采用混合网格法进行变形区域塑性主应变分布测量。

analysis on the strain distribution of carbon fiber in coherent length of member in bending

受弯构件粘结长度内碳纤维应变分布的分析

influence of welding with trailing peening on strain distribution of welded joint of high strength aluminum alloy;

研究了随焊激冷减小铝合金薄板焊接变形的效果及夹具的散热条件对该效果的影响。

it shows common features of regional vertical deformation anomaly area and high strain distribution area of horizontal deformation.

区域性垂直形变异常区与水平形变的高应变分布区共生的特征。

This research demonstrate that photo-plastic material memory faculty is confident to define plastic deforming strain distribution.

研究表明,利用光塑性材料记忆性确定塑性变形的应变分布是可靠的.

Then it compared the stress distribution and strain distribution of blades which is orthotropic material.

并比较了各向异性材料叶片的模态应力和模态应变的分布状态.

Base on the basic theory of finite-element analysis, hypostatic modeling for four-side simple supporting plank was upbuilt with ANSYS software. Three-dimensions hypostatic model and plane model were present by simulating the strain distribution of four-side simple supporting plank with damage using finite-element analysis software.

介绍了有限元分析的理论基础，用ANSYS软件对四边简支板试件进行了实体建模，比较了三维实体模型和平面模型特点，并指出了采用平面模型进行建模的合理性；

Commonly, ultrasound elastography can only obtain the axial strain distribution of tissues with an external compression.

超声弹性成像通常只能得到组织在外部压缩作用下的纵向应变分布.

From the specimen in cross-sectional view of the central and the equivalent strain along the inside corner to the lateral direction, the strain distribution is uneven. Through analyzing numerical simulation results and the deformation of the samples after the morphology and microcosmic comparison, simulation was effective.

通过数值模拟结果和变形后试样的形貌及微观组织进行对照，验证了模拟的有效性。

The results show the strain distribution of soft tissues is imaged and compared with corresponding B-mode images, and the elastic properties of target tissue which can not be acquired from B-mode images are detectable by the system described in this paper.

实验结果表明，该应变成像系统在获得传统B型超声图像的同时，可以获得组织内部的应变分布图像，从而获取在B超图像上无法得到的组织弹性变化。

probability distribution of hs-wedm failures the experiment and analysis of constant strain to high-speed linecut machine

高速走丝线切割机故障概率分布研究高速走丝线切割机电极丝恒张力的实验及分析

The volume strain forms a compressive region at the centre area of reservoir, and a tensile at the bank area and expands in all directions being consistent with the distribution of epicenter of induced earthquake.

体应变一般在库中心位置形成压缩区，而在库岸边则形成拉伸应变区并同时向四周扩展，与诱发地震震中分布相一致。

based on the finite element approach, we investigated the strain field distribution of gan/ aln self-organized quantum dot.

利用有限元法，研究了GaN/AlN自组织量子点材料的应变场分布。

The distribution of stress and strain of the specimens with a big root radius ( R ≥ 2mm) and a small root radius ( R ≤ 2mm) are different.

较大缺口根半径（R≥2mm）和较小缺口根半径（R

This was further proved by the discrepancy between practical and theoretical misorientation distribution. The discrepancy was explained by strain accommodation mechanism.

实际取向差分布特征与理论情况的差异也证明了这一点，使用应变补偿机理解释了这一差异。

First of all, comparing the numerical stress state and displacement of a circle underground tunnel in deep depth with the theoretical stress and displacement distribution under plane strain state, we check that the program is accurate and efficient.

首先，通过与深埋圆形洞室在平面应变问题时应力场和位移场的理论解进行比较，验证了程序的正确性。

Research on Temperature and Strain Fields Distribution of Hot Ring Rolling Process

环件热辗扩温度场和应变场分布的研究