strain distribution的例句大全

It worked out the tensile stress-strain curve, the load-displacement diagram, the maximal stress distribution figures and the crack history figure during the deformation and failure process of the concrete specimen.

数值模拟结果给出了混凝土拉伸应力-应变曲线和三点弯曲载荷-位移曲线，以及混凝土试件破坏过程最大应力分布图和裂纹扩展图。

Study on Dentification Ability of Inbred Strain Mice Tooth Germs Implanted into Oral Submucosa and Alveolar Process AIM: To analyze the distribution of initial stress around screw implant.

近交系小鼠牙胚同种异体移植至口腔粘膜下或牙槽骨内成牙能力的研究目的：分析螺旋形种植体植入下颌骨后骨界面初始应力的分布。

Because of complexity of the stress distribution in the repaired structure, based on the residual strength degradation model the authors introduce into the local stress-strain method to set up a fatigue life prediction model for the composite repaired structure.

针对复合材料修补结构应力分布复杂的特点，在剩余强度衰减模型的基础上引入局部应力应变法的分析思想，建立起复合材料修补结构的疲劳寿命预测模型。

In the paper, based on the deformation theory, the author deduces the distribution regularities of strain, thickness of plate and real stress in the deforming region through analyzing stress and strain in the round hole burring process

通过对圆孔翻边应力应变分析，应用全量理论，推导出了变形区应变、厚度及变形时材料真实应力的分布规律

Analyses of Expression and Distribution of GFAP and NSE at the Terminal Stage in the Brain Tissues of the Hamsters Infected with Scrapie Strain 263K

羊瘙痒因子263K感染仓鼠终末期脑中胶质纤维酸性蛋白和神经元特异性烯醇化酶的表达和分布变化研究

The stress field, strain field and thickness distribution of the oil pans during forming process were calculated.

对发动机油底壳在冲压成形过程的应力、应变及厚度分布进行了数值模拟。

The paper showed the radius distribution, thickness distribution, temperature distribution, stress distribution, strain rate distribution and so on.

得出了半径分布、厚度分布、温度分布、应力分布、应变速率分布等结果，展示了吹胀段的外形。

This paper, based on the finite element method ( FEM) and utilizing two different means, analyzes the stress and strain field distribution of central through crack tip on a finite flat plate, and calculates the stress intensity factor of the crack tip.

基于有限元分析方法，对有限大平板中存在的中心穿透裂纹，分别用不同的方法分析其裂纹尖端应力、应变场分布，计算出裂纹尖端的应力强度因子。

Simulation of the distribution of temperature field, stress field and strain field during LFW;

有限元热力耦合方法模拟方型钛合金试件线性摩擦焊接过程中的温度场、应力场和应变场的分布特征；

Based on analysis of engineering geological conditions and deformation characters, the slope deformation mechanism is studied. Three-dimension geological model is established to analyze the distribution of stress and strain of slope. Flac-3D software is used to simulate the excavation process of the loess slope.

通过边坡工程地质条件及变形破坏特征分析，建立FLAC3D地质模型，采用数值模拟方法研究了边坡变形破坏机制，在此基础上提出削方减载、锚筋桩、锚杆及坡面防护的综合治理措施。

Whatever shapes of solder joints, under the thermal loading, the distribution of the largest equivalent Von Mises stress/ strain are all approximately same which is in the brim of solder close to the joint of solder and PCB.

研究发现，在热载荷作用下，鼓形、凹形及柱形钎料焊点的最大应力应变分布大致相同，均在钎料球的外边缘。

They are analyzed that the distribution rules of the displacement field and strain field of a pile foundation. The causations of the mutation of the displacement in the area of a pile tip are given out.

分析了单桩桩基位移场和应变场的分布特点，对单桩桩基底部区域竖向位移突变的成因进行了分析；

3D deformation pattern picture, the stress and strain of tube surface and regularities of distribution of spinning force during the process of three-roller synchronous hot backward spinning are investigated.

研究了三轮同步热反旋过程中的三维变形图，管坯表面应力、应变以及旋压力分布规律。

In this paper, based on the platform of ANSYS software, the method of multi-field coupling is used to analyze the thermodynamic characteristics of the valve. From the simulation results, the temperature distribution, thermal strain and thermal stress inside the valve body are obtained.

本文采用热流固多场耦合的方法，基于ANSYS有限元软件，进行高温阀热力学特性的仿真分析，得到了高温阀稳定工作时，阀体内部的温度场、热应变场及热应力场分布规律。

The lining water pressure distribution and the strain of the lining have been studied with different proof-drainage patterns: half covered waterproof board and whole covered waterproof board through model test.

通过模型试验研究了防水板半包和全包对衬砌水压力和结构受力特征的影响。

With the measurement dates by jacking method and resistance strain gage method. Intermediate bearing load and stand location and bearing load distribution of tail bearing can be calculated.

该系统采用顶举法和电阻应变片法的轴系测量方法，通过测量数据计算中间轴承负荷，并可以准确计算尾轴承支点位置和载荷分布情况。

Firstly, roll-pressing course of spirally grooved tube is simulated by kinds of shape tools ( sphere and triangle with arc) so as to obtain the distribution of stress, strain, the states of metal flow, the deformation of corrugation and the value of roll-pressing force.

首先，分别采用了球形和带过渡圆弧的三角形滚压辊辊型，模拟了螺旋槽管的滚压过程，从而得到了应力、应变分布情况；金属流动情况；

Numerical simulation is conducted by nonlinear finite element method. And the distribution of concrete cracks, stress contour figures, strain contour figures, load-displacement curves and slip distribution curve are acquired.

对构件进行了非线性有限元分析，获得了构件中混凝土裂缝分布图、应力云图、应变云图及荷载&位移曲线图、滑移分布图等。

The distribution characteristics of stress, strain and stored energy has been analysis, and the slip system during plastic deformation has been discussed.

讨论了应力、应变场和形变储存能分布的特点，并讨论了滑移系在塑性变形过程中的开动情况。

isolation and dynamic distribution of white spot syndrome virus sheyang strain in crawfishes

对虾白斑综合征病毒射阳株的分离及其在螯虾体内的动态分布