stress Testing的例句大全

Effect of Residual Stress on the Hardness of Metallic Glasses Using Finite Element Simulation of Indentation Experiment; testing with Seleroscope

有限元方法模拟压痕实验研究残余应力对金属玻璃硬度的影响用塞勒硬度试验器试验

The testing results show that the porosity of sandstone decreases with increasing effective stress at the fixed temperature level, following the law of negative exponent.

试验结果表明，有效应力对砂岩孔隙度的影响较大，在温度一定的情况下，砂岩的孔隙度随有效应力的增加而呈负指数规律减小；

Bar-bar tensile impact testing apparatus was used to study mechanical behavior of 20# steel at different strain rates. From the stress-strain curves obtained, it is found that the strain rate effect is distinct.

利用旋转盘式间接杆杆型冲击拉伸试验装置对20号钢进行了三个应变率的冲击拉伸试验研究，得到了材料在不同应变率下的应力应变曲线。

By analysing the testing results, the relationships were gained between electric voltage and current, temperature and electric resistance, tensile stress and electric resistance, bending reformation and electric resistance.

通过对实验结果的分析，得到了外加电压与通过材料的电流、温度变化与材料电阻、拉伸应力与材料纵横向体积电阻率、弯曲变形与材料纵横向体积电阻率的关系。

In the testing, stress ratio near threshold region was high and crack closure effect was removed.

此方法在测出ΔKth时应力比R已经很高，实际上已不存在裂纹闭合效应的影响。

According to the wall testing process, we put finite element numerical simulation on the cavity wall which is set the ring beam but without structural concrete column, using discrete model to analysis the principal stress, cracks distribution and displacement of the wall.

参照墙体试验过程，对设置圈梁但无混凝土构造柱的空斗墙体进行有限元数值模拟，采用分离式模型对墙体的主应力、裂缝分布与墙顶位移变化进行分析。

Based on one-dimensional stress wave theory, longitudinal wave is the maine method used in pile dynamic testing.

该方法的理论基础是一维应力波理论，并且实际检测中主要用的是纵波。

Testing Research of Laneway Wall Rock Stress Released by Advanced Bore Decompression Explosion Technique

超前钻孔卸压爆破技术释放巷道围岩应力试验研究

The Testing and Research on the Working Stress of RC Columns

钢筋混凝土柱工作应力试验与研究

Testing and analyses of the working stress of RC columns

钢筋混凝土受压构件工作应力的测试与分析

Analysis is made on the testing parameters of structure and characteristics for the polyester POY of different filament titer spinning under the speed of 3600m/ min, with stress on the spinning stability and the performance for post-processing.

本文对3600m/min纺速下纺制的不同单丝线密度的聚酯POY的结构特征参数进行了测试分析，着重分析了细旦聚酯POY的纺丝稳定性和后加工性能。

By the testing results of the circular stress path on the x plane of medium dense Chengde sand, this paper illustrates that the change of stress Lode's angle has significant effect on the accumulated value of pore pressure.

本文通过中密承德沙π平面上圆应力路径试验结果，说明应力劳台角的变化对孔压累积值有显著的影响。

The testing results about the use of new rail joint was introduced, which include the dynamic flexure stress of upper limb and lower margin of joint bar, shearing stress of horizontally neutral axis.

本文对三种新型钢轨接头现场使用情况的测试结果进行了介绍，主要包括测点处的钢轨接头夹板上、下缘动弯应力、夹板水平中性轴处剪应力。

The statistical analysis of Gompertz distribution base on tampered failure rate model under progressive stress accelerated life testing

Gompertz分布序进应力加速寿命试验损伤失效率模型下的统计分析

Firstly, the testing principle with axial precompression stress is re-examined based on one-dimensional wave theory.

首先按照一维应力波传播理论，对动静组合加载的试验原理进行理论论证。

Specimen preparation, testing methods, well-bonded fiber, bridging fiber, broken fiber, residual stress, stress transfer, interface slip and friction shear stress were described in details.

从试样制备、测试方法、完整粘接纤维、搭桥纤维、断裂纤维、残余应力、应力传递、脱粘界面滑移、摩擦剪应力等方面进行详述。

The paper analyses the problems existed in the current approach for testing the yield stress of the magnetic-flow variation fluid, and puts forward a new kind approach for testing the yield stress, which applies the shearing deformation among the liquid to measure the yield stress.

分析了现有磁流变液屈服应力测试方法中存在的问题，提出了一种新的屈服应力测试方法，该方法利用液体之间的剪切变形测量屈服应力。

AMLEs for Constant Stress Accelerated Life Testing under Lognormal Distribution

对数正态分布场合恒定应力加速寿命试验的MLE和AMLE

Statistical Analysis of Type ⅱ Censoring Data from Step-Stress Accelerated Life Testing on the Lognormal Distribution Case

对数正态分布步加寿命试验的统计分析

Then, contact stress and deformation of a half sphere micro-convex was simulated and calculated by using finite element analysis software ( ANSYS), and the testing model of pin-on-disc sliding wear was proofed through test data.

采用有限元分析软件ANSYS对半球形微凸体接触应力和变形进行了仿真计算，并用销盘滑动磨损试验数据给予验证，证明了所建立的仿真模型是可行的。