stress element的例句大全

Then two schemes are presented to reduce the false stress in a transition element connecting an axisymmetric solid element to an axisymmetric thin shell element for axisymmetric stress analysis.

方案一是在采用体元应力应变模型的基础上提出了一种单元内位移、应变及应力的直接修改方法；

The response-displacement method and thin circular cylindrical shell finite element model are used for the analysis of earthquake stress at the T-joint of buried pipes. The numerical results are in good agreement with the experimental results, and some useful conclusions are obtained.

采用反应位移法和圆柱薄壳有限元模型对地下管道三通地震应力进行了分折.计算结果与实验结果吻合较好，得出了一些有益的结论。

Water retaining wall is simplified as thin-plate bending structure according to its stress and structural characteristics before thin-plate finite element theory is applied to conduct structural analysis.

根据挡水墙的受力和结构特点，将其简化为薄板弯曲结构，进而运用薄板有限元对其作结构分析。

Application of Finite Member Element Method for Stress Analysis of Space Thin-walled Structure in Agricultural Machine Design

空间薄壁杆系有限元分析在农业机械设计中的应用

Finite element stress analysis and calculation is often referred in the agriculture engineering machine design process, especially to space thin-walled structure.

在农业机械和工程机械设计中经常遇到空间梁单元应力的有限元计算，特别对于闭口截面的空间梁单元，其应力计算方法十分复杂繁琐。

This paper has got the initial stress field and boundary conditions. On this basis, the overall planar elastic-plastic finite element model of the underground caverns was established by ADINA ( a finite element program for automatic dynamic incremental nonlinear analysis).

本文在确定了厂房区的初始应力场和边界条件的基础上，应用ADINA自动动态增量非线性有限元程序对思林水电站地下洞室群建立了平面弹塑性有限元计算模型。

Finit element analysis on stress of slip screw thread fit screw thread tooth base

滑动螺旋副螺纹牙根应力有限元分析

The Influence of the Screw Thread and the Height of Constraints on the Stress Distribution around Dental Implants by Using Three-Dimensional Finite Element Analysis

螺纹与约束高度影响种植体应力分布的三维有限元分析

The distributions of stress and strain ahead of a precrack tip in three point bending specimen are calculated by finite element method and the fracture surfaces, the micro-cavities and micro-cracks in the vicinities of the precrack tip are also observed.

对三点弯曲预裂纹试样断口形貌、裂尖附近微孔及残留裂纹进行了观察，并用有限元方法计算了裂尖应力应变场。

The paper takes Dongjiang Fourth Bridge in Huizhou city as an example for searching for the influence of Pre-stressed strand arrangement on the craze of box girder. By using great Finite-Element analysis ANSYS special part model of box girder have been built up through adopting three-dimensional body element.

为了探求预应力的布置对箱梁开裂的影响，以惠州市东江四桥为例，利用大型有限元程序ANSYS，采用三维体单元建立箱梁节段空间局部模型。

Computational program for three-dimensional stress analysis with boundary element method

边界单元法三维应力分析计算程序

Boundary Element Method for Three-Dimensional Stress Analysis of Round Shafts with a Transverse Circular Hole

带横孔圆轴三维应力分析的边界元法

A Study on Stress Around a Drift Excavated in Three-Dimensional Stress State Ground by Boundary Element Method

巷道围岩应力分布影响因素的研究巷道围岩三维应力的边界元分析

The Finite Element Study of Three-Dimensional Stress Concentration Factor of Half Infinite Solid with Surfact Notch

具有表面凹坑的半无限体三维应力集中系数有限元研究

The relaxations of stress of PTT fibre and PET fibre may be simulated by using a three-element mechanical model.

三元件模型能较好地模拟PTT纤维和PET纤维的应力松弛过程。

This paper, based on the finite element method ( FEM) and utilizing two different means, analyzes the stress and strain field distribution of central through crack tip on a finite flat plate, and calculates the stress intensity factor of the crack tip.

基于有限元分析方法，对有限大平板中存在的中心穿透裂纹，分别用不同的方法分析其裂纹尖端应力、应变场分布，计算出裂纹尖端的应力强度因子。

According to the wall testing process, we put finite element numerical simulation on the cavity wall which is set the ring beam but without structural concrete column, using discrete model to analysis the principal stress, cracks distribution and displacement of the wall.

参照墙体试验过程，对设置圈梁但无混凝土构造柱的空斗墙体进行有限元数值模拟，采用分离式模型对墙体的主应力、裂缝分布与墙顶位移变化进行分析。

Stress analysis are presented for the main components such as thrust plate assemblies, pressing plate assemblies and oil cylinder seats used in large sized frame or chamber type filter presses by the finite element method.

针对大尺寸板框、厢式压滤机的油缸座、止推板体、压紧板体等主要承载构件，用有限元方法进行了应力计算。

A static analysis of the No. 2 leg-cone of a tricone bit is conducted by the finite element method, and the distribution pattern of the contact stress on the leg journal and thrust surface with different bearing clearances is worked out.

用有限元法对某型三牙轮钻头的2号牙轮－牙爪进行了静力计算，求得不同轴承间隙时牙爪轴颈及止推面上的接触应力分布规律。

Thermal-Stress Analysis on One-piece Slant Machine Bed Based on Finite Element Analysis Method

基于有限元的一体式斜床身热-应力分析