surface stress的例句大全

Articular cartilage is mainly composited by cartilage cells and matrix, and its function is conducting and distributing loading, maintaining and bearing the contact stress of articular surface.

关节软骨主要由软骨细胞和细胞基质构成，其功能是传导及分布载荷、维持和承受关节面的接触应力。

Influence of the geometric parameters of slotted bar on stress concentration factor at prefabricated V-shaped groove bottom of the bar surface;

通过具体算例，讨论半圆形沉积谷地表面上的地震动、浅埋圆形结构周边位移及动应力集中系数。

The laser-controlled thermal stress cutting induces and controls the crack propagation by using the thermal stress which is caused by the surface temperature field gradient in the laser cutting. And it is an effective manner to split the glass, ceramics and other brittle materials.

激光热应力切割技术通过激光束切割材料表面时引起的温度场梯度变化产生热应力，诱导并控制裂纹扩展，从而分割材料，是对玻璃、陶瓷等脆性材料切割的有效方法。

Thermal Stress Analyses of Cement Based Semi Rigid Surface Course Composite

水泥基复合半刚性面层材料热应力分析

The analysis shows that when same thick glass sheet is produced in same forming conditions, the transverse shrinkage stress caused by surface tension and longitudinal dragging has little effects on shrinkage of glass ribbon behind the last pair of top rollers.

分析表明，生产同一厚度玻璃，在成形条件相同时，表面张力与玻璃纵向拉引产生的横向收缩对末对拉边机后玻璃带收缩率的影响不大。

The Stress from Thermal Impact with a Rapid Temperature Drop in the Concrete Surface

混凝土表层的冷击应力

Experimental research on stress intensity factor for surface crack at external thread root of threaded connection

螺纹联接外螺纹牙底表面裂纹应力强度因子的实验研究

This paper briefly describes several commonly used methods for identifying noise sources and puts stress on some of them, such as the methods of surface sound intensity, sourd intensity with double-microphone and complex sound intensity, etc.

简要论述了识别发动机噪声声源的几种常用方法，重点讨论了表面声强法、双话筒声强法和复数声强法在发动机声源识别中的应用。

Problems: The primary stress to which the surface of the mould is exposed are thermal shock, abrasion and chemical reactions between the liquid alloy and the iron in the steel mould.

问题：压铸模具表面主要面临的问题有热冲击、磨损、液态合金与模具钢的化学反应等。

Bom showed under the condition of ground surface deformation, tension or compression, the presence of foundation slip layer reduces the additional stress effectively, and there is an upper limit for effect of horizontal deformation of ground surface to superstructure limit.

分析与试验都表明，在地表拉伸或压缩变形条件下，基础滑动层的设置均能有效地降低墙体和加固构件的采动附加应力，地表水平变形对上部结构的作用存在上限值。

Using stochastic medium model in surface movements of self-weight stress mining have been made great successful.

随机介质理论模型应用于自重应力作用型矿山地表移动取得了巨大成功。

A half-analytical expression of stress concentration coefficents due to surface roughness was proposed, and a prediction method of fatigue limits of peened specimens with surface fatigue sources was suggested.

提出了表面粗糙度引起的应力集中系数的半解析表达式以及疲劳源在表面时疲劳极限的预测方法。

Based on the theory of stress waves, the three dimensional distribution of the stress wave energy is calculated from the model. With the aid of the index of specific surface energy, the blasting fragmentation distribution of the isotropic and elastic rock can be obtained.

模型根据应力波理论，计算出应力波能量的三维分布，以岩石破碎单位表面能指标作纽带，首先求算出均质连续弹性台阶岩体的爆破块度分布。

Dynamic Graphic Expression of Concrete Failure Surface in Principal Stress Space

混凝土破坏面在主应力空间中的动态图形显示

The authors adopts movable artificial rainfall test devices to conduct experimental study on model slope yields under the outdoor conditions of different type of soil, slopes and vegetation and puts the stress on the analysis of impacts of underlying surface factor to the velocity of slope yields.

采用活动式人工模拟降雨试验装置，在室外对不同种类土壤、坡比、植被条件下的模型坡面产流进行了试验研究，重点分析了下垫面因子对坡面流流速的影响。

Electric Stress Calculation and Design Optimisation of SF_6 Current Transformer According to the characteristic and the precision demand, it improved the electric calculation method of surface charge.

SF6电流互感器电场计算及其结构优化根据电场计算方法和物理模型建立了空腹式接地装置的计算等效模型。

The main failure pattems of the sealing surface of the gate valve of a gas production wellhead working in sulphurous gas include weight loss corrosion, stress corrosion and wear.

采气井口闸阀在含硫天然气介质中工作，密封面失重腐蚀、应力腐蚀及磨损是其主要失效形式。

Stress of Surface Layer of Small-diameter Manchurian Ash Timber during Drying

水曲柳小径木锯材干燥过程中的表层应力

In the shape analysis of stress surface contour of 3D footprint, the consistency of datum plane cannot be strictly controlled, so a descriptor insensitive to perspective transform is needed.

在立体足迹的重压面边界围线的形状分类和识别中，由于不能严格控制基准面方向的一致性，必须采取对透视变换不敏感的描述方法。

Effect of Surface Topography of Porcelainous Braced pillars on Stress Distribution of Vacuum Plate Glass

陶瓷支撑柱表面形貌对真空平板玻璃应力分布的影响