thermal engine的例句大全

The research of real-time detecting and alarming system of the thermal engine cleanout

热洗车台上锅炉温度、压力实时检测及报警系统研制

Thermal engine is the drive-device of AUV driven by temperature difference energy.

热机是温差能驱动水下监测平台的动力装置。

Kinetics simulation model of propulsion system and torpedo motion are proposed by considering thermal engine system characteristics, propeller characteristics and torpedo motion characteristics synthetically.

并综合考虑热动力推进系统、推进器及雷体的运动特性，建立了推进系统加雷体运动的鱼雷全系统运动仿真模型。

The varying work condition is the most important problem to the underwater thermal engine system which controlled by pressure regulator.

基于压强调节阀控制的动力系统换速问题是决定某水下航行器（如鱼雷）热动力系统安全性的最重要的问题。

Comparison in performances of Brayton and Carnot thermal engine cycles(ⅰ) steady flow cycles with infinite reservoirs

布雷顿和卡诺热机循环性能比较（Ⅰ）定常态流恒温热源循环

Power Optimization of a Chemically Driven Thermal Engine

化学反应驱动热机的功率优化

Combining the thermal engine which driven by the temperature difference energy with mechanical design and control system deign, the underwater glider is developed.

结合能够把水域温差能转变为机械能的热机设计以及滑翔器的主要机械结构和控制硬件系统设计，完成了滑翔器的初步设计与开发。

The granitic magma generated in the crust, but the generation is driven by the mantle thermal engine.

花岗质岩浆虽然起源于地壳，却是受地幔热引擎的驱动。

Furthermore, the natural vibration characteristics of torpedo thermal engine are analyzed, as well as the influence of structural parameters on vibration transfer and radiation noise. The research is expected to lay a foundation for the vibration reduction design of torpedo thermal power engine.

通过模态研究，分析了鱼雷热动力发动机机体固有振动特性，以及各结构参数对振动传递及噪声辐射的影响，为鱼雷热动力发动机的减振设计奠定基础。

This thesis investigated the characteristics of thermal engine, and the working feasibility of it was testified by experiments.

本文试验研究了热机的特性，证明了热机工作的可行性。

Take the example of three point contact ball bearing applied on the spindle of advanced aircraft engine, its dn value and work temperature are very high, often causing the contact thermal failures.

如先进航空发动机主轴采用的三点接触球轴承，其dn值和工作温度非常高，经常造成摩擦副发生热失效。

The cause of thermal crack of the "bridge" is found to be scale formation and insufficient flow of cooling water, that is verified by practical running of an engine.

找出了鼻梁处热裂的原因之一是由于水垢及水流不畅，并从实际发动机中得到证实。

A Review of Thermal Current Load Analysis for Internal Combustion Engine Parts

内燃机零部件热负荷研究的现状讨论与展望

Thermal cycle design of liquid nitrogen engine

液氮发动机的热力循环设计

Gadget Jacket Charged by the Sun This paper introduces TMC ( thermal management controller), which can realize the functions of controlling inlet temperature of gas engine jacket water, polytype heating output and thermal management.

本文介绍了一种既可以控制燃气内燃机缸套水温，又可以实现多种类热用户热量输出和热能管理功能的热能管理器，并对其热能管理思路和设计过程进行详细阐述，给出了设计实例。

The wall temperature of combustion chamber is closely related to the work process of the engine. The wall thermal conductivity is unsteady in the short woring process of the combustor.

燃烧室壁面温度的变化和发动机的工作过程紧密相关，在短时间工作过程中，壁面导热处于非稳态状况。

Thermal equilibrium experiment involves many factors, The specific engine performance parameters could be seen by experiment.

热平衡试验涉及因素众多，通过试验可以清晰了解发动机的各项具体性能参数。

Design of Integrated Thermal Management Controller for CCHP System Based on Internal Combustion Engine Generator Set

内燃发电机组冷热电联供系统集成式热管理器的设计

Fiber Sensor and Measuring System for Studying the Influence of Combustion Flame on the Thermal Boundary in Cylinders of Diesel Engine

用于研究柴油机缸内燃烧火焰对壁面热边界层影响的光纤传感器及测量系统

In this thesis, it takes the cooling system item of a six-cylinder direct injection diesel engine as the research background. The author researched cooling water jacket with CFD method and simulated the temperature field of cylinder head by thermal boundary conditions which obtained from the calculation.

本文以一台六缸直喷式柴油机冷却系统项目为研究背景，应用CFD分析方法研究缸盖冷却水套；并利用仿真计算获得热边界条件，进行缸盖温度场模拟。