thermal strain的例句大全

Thermal strain analysis of a flip-chip package by a modified hybrid method

用改进的混合方法分析微电子封装热应变场

The Affection of Thickness to Critical Thermal Strain Values about Thermal Buckling of Thin Rectangular Plates

薄板厚度对热屈曲临界温度应变值影响的数值分析

Analysis of Effect in the Infrared Optical Films by Thermal Strain

红外光学薄膜的热应变效应分析

The Thermal Strain of the Four Prestressed Steel Wires under Stress

不同应力水平下预应力钢丝的温度变形

Measuring Method in Thermal Strain of Flip Chip Package with Solder Joints

球栅阵列倒装焊封装中的热应变值的测试

At 1 000 ℃ it emerges the negative maximum free thermal strain of-0.206%.

1000℃最大自由热应变是-0.206%。

It is shown that the unmatched thermal strain results in compressional stresses in the fibers, tensile stresses in the matrix, and compressional normal stresses on interfaces.

研究表明，热应变的不匹配导致纤维受压，基体受拉，界面法向受压。

Measurement of the solid rapid thermal strain induced by high intensity laser

强激光引起的固体材料的快速热应变的测量

An experimental analysis of thermal strain on solid motor safe device

固体发动机保险机构在高温高压下的实验研究

When temperature changes, the bimetal sheets confined under the structures designed in the paper will produce a thermal strain and change the F-P cavity length, the intensity output of the sensor will vary, then measuring this changement a temperature sensor could be realized.

当温度变化时，热双金属片在文中设计的结构约束条件下发生挠曲使得F-P腔腔长改变，致使传感器输出光强发生变化，从而可以实现温度测量。

Research on the law of thermal strain in the column of machine tools

机床立柱热变形规律的研究

Influence of residual thermal strain on tension and compression behaviors of metal matrix composites

热残余应变对金属基复合材料拉、压性能的影响

Studies on oxidation resistance and thermal strain of graded nickel/ zirconia deposits

Ni/ZrO2梯度镀层高温氧化性能及热应变特性

Prediction of thermal strain in diamond-zinc sulfide composite infrared windows

金刚石-硫化锌复合窗口的弹性应变研究

Measurement of the high temperature thermal strain and its application to castable refractory

高温热应变测试技术及其在耐火浇注料上的应用

Experimental Research on the Transient Thermal Strain of High Strength Concrete at Elevated Temperature

高温时高强混凝土瞬态热应变的试验研究

A Study on the Thermal Strain Characteristic of the Bamboo Surface

竹材表面热应变特性的研究

Based on the liquid film theory of hot crack formation and results of numerical simulation of solidification and thermal strains, equivalent strain is proposed to serve as the criterion for hot cracking.

从热裂产生的液膜理论出发，根据凝固过程温度场和应力场、应变场的数值模拟结果，提出了热裂形成的等效应变判据；

The solution to temperature field, thermal stress, thermal strain, equivalent effective stress and equivalent strain is achieved then.

阐述了温度场的求解、热应力及热应变的理论概要，说明了等效应力与等效应变，并进一步阐明了在热力耦合分析中，机械负荷与温度负荷之间的关系；

Both the inner thermal strain and tension strain of the braided composites were measured successfully by the FBG sensors.

制作了含光纤布拉格光栅的编织复合材料试件并研究了光纤布拉格光栅在编织复合材料多点的内部应变检测中的应用；