tig的例句大全

Tele-operated TIG welding robot for hyperbaric underwater pipeline repair welding

遥操作干式高压海底管道维修焊接机器人系统

Study on the Damage Problem of the Super-high Pressure Tubular Reactor in Safety Engineering Tele-operated TIG welding robot for hyperbaric underwater pipeline repair welding

超高压管式反应器安全工程中损伤问题的研究遥操作干式高压海底管道维修焊接机器人系统

The characteristics of dynamic welding angular distortions of aluminum alloy5A12 with TIG welding are investigated by self-made welding dynamic temperature and distortion measuring system.

利用温度与变形实时测量系统，对铝合金5A12薄板氩弧焊接动态角变形过程进行了试验研究，探讨通过特征值来描述角变形动态行为。

The low surface tension and low viscosity of aluminum alloys are the reason that the change of surface tension temperature gradient is not the main mechanism of activating flux increasing weld penetration of activating TIG welding.

而铝合金材料表面张力小，粘度低，是导致表面张力温度梯度改变不是活性剂增加铝合金活性TIG焊熔深的主要机理的重要原因。

The results show that after 45h of cavitation erosion test, the mass loss of the specimen with ground surface was 1.57 times of that with TIG remelted surface.

结果表明：在45h空泡腐蚀试验后，磨削试样的累积失重量是TIG表面重熔试样的1.57倍；

Technology of TIG in small drive thin wall stainless steel tube

细径薄壁不锈钢管的氩弧焊接工艺

Study on pulsed AC TIG welding technology of thin sheet of aluminium alloy

薄板铝合金脉冲交流TIG焊工艺

Temperature field of TIG welding with a spot heat sink of Ti alloy thin sheet

钛合金薄板带热沉的TIG焊温度场

According to detection of TIG welding pool by optical sensor, through adjustment of pulse width of welding current peak value and base value by single-chip computer, the principle and method of penetration control of peripheral welds of cylinders was introduced in this paper.

本文介绍了采用光电传感器检测TIG焊缝熔透状况。通过单片机对脉冲焊接电流峰值及基值宽度的调节，控制圆筒形管环焊缝熔深的原理及方法。

Finally it introduces the main characteristic, principle and technology parameters of pulse TIG welding in detail, and gives such examples as technology parameters of the stainless steel, titanium alloy and aluminum alloy welding.

最后详细介绍了脉冲TIG焊的主要特征、原理以及焊接时的工艺参数，并例举了不锈钢、钛合金、铝合金焊接时的工艺参数选择范围。

The laser-TIG hybrid heating source heats the steel by a similar thermal conductivity welding way, and this will keep the melting metals of Mg, Ni, Fe a metastable state.

激光-TIG电弧复合热源在钢板上以类似于热导焊的焊接模式熔化母材，使得熔池中熔化的金属Mg、Ni以及Fe处于一种亚稳态。

Process Optimization for TIG Powder Overlaying Reaction Synthesis of FeAl Intermetallic Compounds

TIG粉末堆焊反应合成FeAl金属间化合物层的工艺优化

Development of A New Type Thyristor DC TIG Welding Machine

新型晶闸管直流TIG焊机研制

Structure features of cast aluminium alloy weld with TIG welding

铸造铝合金TIG焊焊接区域的组织特征

Application: with steady chemical compositions, it can be used in welding and manufacturing semi-finished of SAW, TIG, MIG wire, etc.

用途：用作电焊条生产之焊条芯线，埋弧焊丝（SAW）、氩弧焊丝（TIG）、电弧焊丝（MIG）之半成品线。

Study on the heat treatment of CLAM steel joined by TIG

CLAM钢TIG焊后的热处理工艺研究

Microstructure and Mechanical Properties of TIG Welded Joint of CLAM Steel

中国低活化马氏体钢TIG焊微观组织与力学性能的研究

Microstructure and Mechanical Properties of CLAM Steel in TIG Weld

CLAM钢TIG焊组织与性能的研究

AFA 3G Gd Rod Top End Plug Girth TIG Wilding

AFA3G含钆燃料棒上端塞环缝TIG焊接研究

For the reasons, Ukraine Paton Welding Institute puts forward the method of A-TIG welding.

针对TIG焊的不足，乌克兰的Paton焊接研究所首先提出了A-TIG焊方法。