voltage reference的例句大全

According to negative temperature coefficient of VBE and positive temperature coefficient of VT, a framework of band-gap voltage reference is investigated.

同时利用PNP晶体管发射结电压的负温度特性和发射结差值电压的正温度特性设计了一个带隙基准电压源。

in this paper, we studied on critical current mode active power factor correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.

本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

高精度、低温度系数带隙基准电压源的设计与实现

Design of High Temperature Stability Voltage Reference By Pspice

基于PSPICE高温度稳定性基准电压源的设计

Voltage reference is a vital basic module which is widely adopted in analog circuits ( mixed signal circuits). Its temperature stability and antinoise capability influence the precision and performance of the whole system.

电压基准源是模拟电路（混合信号电路）设计中广泛采用的一个关键的基本模块，它的温度稳定性以及抗噪性能影响着整个电路系统的精度和性能。

Using this impulse voltage reference device the certification impulse voltage measurement system can be made.

国际比对确认所建冲击电压标准装置不确定度≯%可以开展对冲击电压测量系统的认证.

A simple structured novel error amplifier with initial voltage reference for series voltage regulator is designed.

针对串联型稳压器,设计了一种应用于串联型稳压器具有自建基准的新型误差放大电路.

a voltage reference circuit with high precision is designed for the whole rf transceiver system.

本论文为整个射频收发机芯片设计了一种高性能的带隙基准电压源.

the appropriate spectrum for 6 a peak drain-current, 13 v gate voltage and 380 v drain-source voltage has been chosen as reference.

为在峰值6安培漏极电流下获得适当的频谱，选择13伏特的栅源极电压和380伏特的漏源极电压为参考。

based on the mathematical model of the three phase converter, the current loop and voltage loop control blocks were deduced and the control parameters were designed, which can be the reference of the grid connection pq control strategy for general dg unit.

其次针对并网模式下的三相变流器控制展开研究。建立了三相半桥变流器的数学模型，推导电流内环、电压外环的控制框图并进行设计，可作为通用并网PQ控制DG节点设计参考。

Firstly the sub-blocks including bias circuit, bandgap reference, and voltage regulator circuit are introduced, and then the temperature coefficient adjustment of voltage generated by bandgap reference is analyzed.

介绍了该电路的各子模块电路，包括偏置电路、带隙基准电路和输出电压调节电路，详细分析了带隙基准电路所产生的基准电压的温度系数及其调节原理。

though the matlab simulation, the influence of the power voltage aberration, the effect of reference input voltage amplitude and the frequency, especially the effect of the integral gain variation are discussed, and then a valuable conclusion is given.

通过建立MATLAB仿真模型，研究了电网电压畸变、参考输入电压幅值和频率，以及积分增益变化对检测性能的影响，并得出有实用价值的结论。

a high accuracy bipolar bandgap reference with wide input voltage range

一种适用于宽电源电压幅度的高精度双极带隙基准电路

at present, the bandgap reference voltage has been the most popular reference voltage generator in cmos integrated circuits.

同时，带隙基准电压源电路的结构简单，可靠性较高，可以用标准CMOS工艺实现，适宜于大规模生产，目前已成为CMOS集成电路当中最流行的一种基准电压产生器。

hence, the work of this thesis is the design of a low voltage low power cmos bandgap reference voltage source.

因此本文主要工作是设计一个低压低功耗的CMOS带隙基准电压源。

The reference voltage supplied to the AD 7762 determines the analog input range.

模拟输入范围取决于AD7762采用的基准电压.

The reference voltage supplied to the AD 7763 determines the analog input range.

模拟输入范围取决于AD7763采用的基准电压.

Therefore, we get the bandgap reference voltage with very small temperature coefficient.

由此得到温度系数很小的带隙基准电压.

The demodulator receives its reference voltage from the signal-generator voltage supply.

解调器的参考电压由电信号发生器电压电源供给.

V 3 the zener provides a reference voltage.

V3稳压管提供参考电压.