wire welding的例句大全

In this paper, a computer controlling hot-wire TIG ( GTA) tube welding sys-tem is p resented to raise the welding speed and quality, which fits the needs of thedevelopment of production.

本文介绍了新开发的微机控制热丝钨极氩弧焊（GTA）焊管系统，旨在提高焊接速度及质量以适应生产发展的需要。

The small pneumatic spot welder is specially designed for welding with the stainless steel, nickel, iron, tinned wire and sheet copper.

该小型气动点焊机是专为焊接不锈钢、镍、铁、镀锡铜线、铜片等所需而特殊设计的。

This paper illuminates the advantages and methanism of Nd: YAG laser on zinc-coated steel welding with wire feed.

介绍了采用Nd：YAG激光器在镀锌板填丝焊接中的应用优势和加工机理，分析了实验结果。

research on high penetration mag welding process with single wire

单丝高熔敷率MAG焊接工艺的研究

the system and technology of high efficiency double wire mig/ mag pulse welding

高效双丝MIG／MAG脉冲焊系统及工艺

Frequency Conversion Tension Control of Layer Winder for Welding Wire

焊丝层绕机的变频张力控制

As the modern machine manufacturing industry develops rapidly and welding techniques improve in China, wire demand keeps increasing, and the growth in wire production drives demand for wire winding machines.

随着我国现代化加工制造业的高速发展和焊接工艺水平的提高，对焊丝的需求不断增加，焊丝生产的发展扩大了对焊丝层绕机的需求。

Rust Prevention of Welding Wire Protected by Carbon Dioxide Gas

二氧化碳气体保护焊丝防锈技术

Study and application of metal powder-cored wire and RMD technology in all-position root welding of pipeline

金属粉芯焊丝+RMD技术在管道全位置根焊中的研究及应用

Color CRT Frame welder Full Automatic Thin Wire& Tube's Legs Welding Machine

彩色显像管框架焊接机全自动丝线引脚焊接机

Design narrow gap groove suitable for dual beam laser welding thick plates with filler wire, guaranteed technological requirements of single pass multilayer welding and low deformation, increased neutral of wire and light to some extent.

设计了适合于厚板双光束填丝多层焊的窄间隙坡口形式，保证了厚板激光填丝焊的单道多层焊与低变形工艺要求，并一定程度上提高了丝与光对中性。

Influence of fluoride compounds on welding technicality of basic flux cored wire

氟化物对碱性药芯焊丝焊接工艺性能的影响

Resistance Welding Between Coil Leading-wire of AC Contactor and Plugging Sheet

交流接触器线圈引出线与插片的电阻焊连接

In the three conditions, wire feed rate variety are within 10%, and accord with the JB/ T8748 1998, MIG/ MAG arc welding machine standard demands.

送丝速度变化率在三种情况下均小于10%，符合JB/T8748-1998，MIG/MAG弧焊机标准要求。

In this paper, the following is introduced, the setting for laser welding with filler wire, the interaction between laser beam and filler metal and weldment, the relations between wire feed rate and welding speed.

介绍了激光填丝焊的装置；论述了光束与焊丝和工件的相互作用及送丝速度与焊接速度之间的关系；

Because the wire can obtain energy from laser indirectly, the high quality welds and the stability of the welding process could be received by using the higher wire feeding rate.

由于激光对焊丝的热作用，激光-GMA复合焊可以在较高的送丝速度下得到良好的焊缝成形和稳定的焊接过程。

the wire feeding system realizes interface with the digital welding source.

送丝系统的数字化可实现与数字化焊接电源的接口。

The main features are that the back surface weiding seams are even, smooth and weld edge tidy, excellent in performances of welding technology and welding seam dynamics. Unique output special design can suit wire filling welding and form good-looking welding seam.

主要特点是背面焊缝匀称、光滑，焊趾整齐，焊接工艺性能及焊缝力学性能优良。独特的输出特性设计更适合填丝焊接，焊缝美观。

Optimization of parameters for narrow gap SAW using fine welding wire

细丝窄间隙埋弧焊工艺参数寻优

Undesirable Effects of Copper plating Line Stopping on SAW& CO_2 Welding Wire

镀铜焊丝生产线停车时的不良影响