wire welding的例句大全

A new type of underwater welding system is studied, which includes an oscillating wire feed system and a welding power source with staircase external characteristic.

研究了一种新型的水下焊接系统。系统中弧焊电源输出阶梯型的外特性，送丝系统采用脉动送丝方式。

Through the wire sensor of the waveform controlled short circuit CO 2 welding is studied in this paper.

对波形控制短路过渡CO2焊接焊丝干伸长传感器进行了研究。

It was an effective method to solve the stable spray transfer in the MAG welding with constant current by utilizing the new type wire feeder. Using the wire feeder a droplet transfer model was established by employing artificial neural networks ( ANN).

采用新型的脉动送丝机构是解决恒定直流MAG焊稳定射滴过渡的有效途径，应用该机构采用人工神经元网络建立了熔滴过渡模型。

By adjusting the welding parameters, compared single-wire and tandem welding process characteristics, and optimized out the 6005A-T6 aluminum alloy tandem welding process parameters.

通过调整焊接工艺参数，比较研究了单丝焊和双丝焊的工艺特点，优化出了6005A&T6铝合金型材双丝焊接工艺参数。

The authors found the extruding stress is the key to the process of extruding magnesium alloy welding wire, and discussed the factors that affect extruding stress such as lubricating condition, flan temperature, velocity of forming and the shape and size of mold.

通过试验发现，挤压力是镁合金焊丝制备工艺过程的关键，探讨了影响挤压力的各种因素，如：坯料温度、变形速度、变形程度、润滑条件及挤压模形状与尺寸。

Through the welding technology experiment about rear forcible figuration with ceramic backing, lux-cored wire, and mixed gas shielding, the influences of main normative parameters and technical factors on rear figuration were analyzed.

通过对陶瓷衬垫药芯焊丝混合气体保护背面强制成形的焊接工艺试验，分析了主要规范参数和工艺因素对背面成形的影响。

The weldability of D6AC ultra high strength steel is analyzed, and the fundamental of tandem sequence submerged arc welding with thin wire is introduced.

分析了D6AC超高强钢的焊接性，采用细丝双弧焊接方法，进行D6AC超高强钢的双弧焊接工艺试验研究。

Metal powder-cored welding wire for hard-facing of banbury mixer

密炼机用耐磨堆焊金属粉芯药芯焊丝

The self-shielded flux cored wire is a new type of welding materials, which has developed rapidly in recent years and used widely in oil pipelines, bridges, shipbuilding, offshore platforms, buildings and other fields.

自保护药芯焊丝是近几年发展较快的新型焊接材料，已广泛应用于输油输气管线、桥梁、造船、海洋平台、建筑等领域，并且能够适应野外较为恶劣的工作环境。

The results showed that magnesium alloy welding wire can't be fabricated by drawing method as aluminum alloy wire for its poor plasticity, which results in magnesium alloy's close-packed hexagonal lattice and few slip system.

研究表明，镁合金具有密排六方晶格，常温下滑移系少，塑性变形能力差，不能采用与铝合金类似的拉拔方法制备焊丝。

Automatic IC chip welding wire machine, however, is a set of microelectronics packaging equipments which has benn developed by the College of mechanical and electrical engineering Guangdong University of Technology.

全自动IC芯片焊线机，是广东工业大学机电工程学院已研发出来的一套微电子封装设备。

The effects of single-wire unitary pulsed metal inert-gas ( MIG), synergic pulsed MIG and double-wires tandem MIG welding processes on the microstructures and properties of high strength Al-Cu alloy welds were investigated.

研究了单丝单脉冲、单丝复合脉冲和双丝TandemMIG焊对高强Al Cu合金焊缝组织及性能的影响。

By using wire motion and current wave control project which special designed, author get the steady welding process.

送丝系统以交流伺服电机作为送丝电机，通过软件设计了焊丝运动曲线。提出了专门的送丝控制和电流波形控制方案，通过焊接参数配合焊丝运动，实现了稳定的低能量焊接过程。

Based on the soft-switching power supply and by applying the CAN bus technique, a synergic controlled Tandem twin-wire high-speed welding equipment was developed.

在软开关电源的基础上，利用CAN总线技术研制了协同控制的Tandem型双丝焊装备。

The simulation results proved that the influence of the above parameters is remarkable. It is feasible to control the arc voltage and welding current in a certain range through adjusting the pulsed parameters and the wire feeding speed of the simulation model for tandem pulsed MIG welding.

结果证明，脉冲参数及送丝速度对仿真波形的影响是比较大的，在双丝脉冲MIG焊中利用仿真模型来调节各参数以控制电弧电压、焊接电流在一定的范围之内是可行的。

The spherical tank plates' characteristics that is thin, big and weak rigidity should be faced, when plates are checked, and the characteristics that the spherical tanks are welded with automatic precess using welding wire within power and protecting with CO2 are introduced.

提出了球壳板验收、安装应正视其壁薄、尺寸大、刚性差的特点；介绍了药芯焊丝CO2气体保护自动焊在该球罐上应用的特点；

Testing and analysis of arc shape and globule transfer of welding wire attached to 980 MPa-class steel

980MPa级钢配套焊丝电弧形态和熔滴过渡试验分析

industry: nc and cnc machining; wire cutting; welding and bonding; mold; oil seal; stamping die;

所属行业：数控及CNC加工；线切割加工；焊接和粘接；模具加工；油封；冲压模；；

new type of hardfacing flux cored wire for open arc welding

新型明弧硬面药芯焊丝研制

selection of fillet welding wire for aluminium busbar welding

铝母线焊接填充焊丝的选择