swing arm

Hydraulic and electronic swing arm cutting machine

液压电子摇臂式裁切机

Mathematic model for optimal design of swing arm on hydraulic excavator

液压挖掘机动臂优化设计数学模型的建立

Based on the approach of adaptive saddle-fitting, the circle point on the moving plane of the swing arm and the centre points on different moving planes corresponding to diverse mechanisms are searched for by optimization method.

在自适应运动综合理论的基础上，运用优化方法在摆动杆的运动平面上搜索圆点以及其对应各个方案解下不同运动平面上的圆心点，作为二级杆组的两个铰链点。

Optimization result shows that the aluminum alloy swing arm meets the conditions under strength and stiffness required in the circumstances, and the weight is reduced about 12.23% with respect to the steel one.

优化结果表明，铝合金下横臂在满足各工况下强度和刚度要求的情况下，摆臂的重量相对于铸钢材料降低约12.23%。

The utility model is composed of a front swing arm, a torsion bar, a back swing arm, a coil spring, etc.

该装置由前摆臂、扭杆、后摆臂和螺旋弹簧等部件构成。

Double-front-axle steering mechanism comprises two steering trapeziums ( one on each front axle) and a double swing arm, linking both front axles.

双前桥转向机构包含两个独立的转向梯形机构和双前桥间的转向联动机构&双摇臂系统。

Scanning electronic microscope is used to check the fracture form of swing arm trier and energy spectral analysis is done in special area.

利用扫描电镜考察摇臂试验品的断口形貌，对个别区域进行能谱分析。

The Causes and Prevention Measures of Vapor Lock of Swing Arm for Unloading Oil

卸油鹤管气阻的产生及防治对策

Optimization of the Double-swing-arm Independent Suspension System Using UG Software

UG软件在双横臂悬挂系统优化设计中的应用

B.3.2.3 austenitic stainless steels shall not be used for swing arm cables.

摇臂电缆不得使用奥氏体不锈钢。

Design of Swing Arm Sampler Automated Control System Based on Omron PLC

基于欧姆龙PLC的旋臂采样机自动控制系统设计

The paper expatiates the reasons of swing arm vapor lock and its avoiding measures presently, and analyzes the physical significance of the cavitation equation.

阐述了鹤管气阻的原因及目前解决的措施，分析了离心泵汽蚀方程的物理意义。

Meanwhile, swing right arm forward.

同时，右臂前摆。

The paper presents a designing method for the tail end balance weight of the swing arm of the "Crane" type portal cranes.

本文向读者推荐港口鹤式起莺机摇臂尾端平衡重设计方法。

In this article, the analysis on the causes and influence factors of vapor lock of railway swing arm for unloading oil are carried out, and a computational practical example is given.

分析了铁路卸油鹤管气阻产生的原因和影响因素，并给出了分析计算实例。

Welding technique enables several heat-affected zones generated by the matrix to interconnect, and repair welding imposes bad influence on the heat-affected zones further, these factors work together to shorten the failure life of swing arm.

焊接工艺使基体产生的热影响区相互连接，补焊进一步对热影区组织产生不利的影响，这些因素削弱了摇臂的疲劳寿命。

The ordinary spherical seal method is used in hydraulic swing arm, but its practise proves that the phenomenon of permeating and leaking oil often occur.

目前使用的液压推靠器中普遍采用了球形密封方法，实践证明该方法常有渗、漏油现象发生。

The parts design and principle were discussed that includes the oblique plane, the swing arm parallelogram, and the end plane cam.

阐明斜平面、摆臂平行四边形、端面凸轮等部分的设计和原理。

Optimization Design of Double Front Axle Steering Swing Arm Mechanism in Heavy-duty Trucks

重卡双前桥转向摇臂机构的优化设计

The Function of the Swing Arm Skill in Hardles Race

摆臂技术在跨栏跑中的作用

Analyses on Vapor Lock of Swing Arm and Cavitation Bubble Collapse of Pump

鹤管气阻与泵汽蚀分析

The purpose of this study is to analyze the swing arm method of Green and explain its mechanic meaning as well as the positive effect on increasing 100-meter scores to farther indicate the importance of arm strength training to sprint exercises.

对格林摆臂方式进行力学分析，探讨其对百米成绩的积极作用，进而说明上肢训练对短跑的重要性。

The height of swing arm is regulated by the handwheel at the top of the machine and the cutting stroke is regulated by the timer so as to easily obtain optimal cutting position to improve work efficiency and prolong the service life of die cutter and padding plate.

摆臂的位置高低由机器上端的手轮调节，冲裁行程由时间计时器调整，这样可以轻易获得最佳裁切位置，提高了工作效率，延长了刀模和垫板的使用寿命。

Summarization of 38 Cases of Senile Fracture of Surgical Neck of Humerus Treated by Pulling Fresh and Swing Arm

皮牵甩臂法治疗老年人肱骨外科颈骨折38例小结

The dental abrasive testing machine applies a V-like swing arm to driving the wearing part to move along the slope back and forth, which is connected with an eccentric wheel fixed on the crankshaft of the gear motor through a connecting rod.

该机采用V形摆动臂来驱动磨耗部分沿斜面作往复磨耗运动，V形摆动臂通过连接杆与减速电机轴上的偏心轮连接。

Application of Swing Arm Tower Crane Erection Technology in 1000 kV UHV Double Circuit Steel Pipe Tower Construction

摇臂抱杆组塔技术在1000kV特高压双回路钢管塔施工中的应用

At present, the main front suspensions are of telescopic type and lever type, while the rear is of swing arm type.

目前前悬挂装置主要型式有伸缩管式和杠杆式，后悬挂装置主要型式是摇臂式。

The Mechanic Analysis to Swing Arm Method of Green

对格林摆臂方式的力学分析

Though vapor lock of swing arm and cavitation bubble collapse of pump indicate different objects, they have same physical significance, i. e., they all indicate the same physical phenomena of the absolute pressure of liquid less than its saturated vapor tension.

鹤管气阻与泵汽蚀所指的对象不同，但两者具有相同的物理意义，都是指当液体介质的绝对压力小于其实时饱和蒸气压时所体现的物理现象。

The end surface of the positioning screw cap of the equalizing axle is matched with an equalizing axle shell or the end surface of a swing arm.

平衡轴定位螺盖的端面与平衡轴壳或者摆臂的端面相配合。