弯

A freak wave had buckled the deck.

突然掀起的巨浪打弯了甲板。

He struggled to hold the bike down on the banked corners.

拐过斜弯时他竭力将自行车把稳。

The biaxial and axial bending strength of soda-lime glass are also compared in this paper.

本文还将钠钙玻璃试件的双轴向弯曲强度和与其相应的单轴向弯曲（四点弯曲）强度进行了比较。

A curve function is used to describe the shape of bent nerve located in the XY plane parallel to the air tissue surface and the curve tangential is defined as the direction of nerve;

本文首先用一曲线函数表示平行于组织空气界面下方xy平面内弯曲神经的形状，并定义弯曲神经任意一点的方向为该点切线方向，然后给出磁刺激弯曲神经时一个修正的激活函数。

For uniform isotropic materials, bending modulus of three point bending ( TPB) test and four point bending ( FPB) test are almost the same and they are almost equal to material ′ s tensile modulus.

对于均质各向同性材料，三点弯曲实验和四点弯曲实验得到的弯曲模量与拉伸模量基本上一致。

These cruel devices are designed to stop prisoners bending their legs.

这些残酷的刑具是用来阻止犯人弯腿的。

He bent forward and laid a kiss softly upon her forehead.

他弯身向前，在她额头上轻轻一吻。

I took a wrong turn and we got lost in the mountains.

我拐错了弯，我们便在山里迷了路。

The body was twisted, its legs at an awkward angle.

身体扭曲变形，双腿弯成别扭的角度。

The road bent slightly to the right.

这条路稍微朝右弯。

Flexural strength under four-point bending has been determined on samples made of fine mortar containing 0,0.75%, and 1.5% of PVA fibers. The flexural toughness index according to ASTM method and the coefficient of the flexural toughness based on JCI method have been evaluated.

通过四点弯曲试验研究了PVA纤维体积掺量分别为0、0.75%、1.5%的抗折强度，按照ASTM方法确定了SHCC的弯曲韧度指数，通过JCI方法得到了SHCC的弯曲韧性系数。

Standing, feet apart, right elbow bent, with his left hand bending spring, and then bend the left elbow with his right hand bending spring.

站立，两脚分开，右肘弯曲，用左手弯曲弹簧，然后左肘弯曲，用右手弯曲弹簧。

I switched off the engine and coasted round the corner.

我熄掉引擎，靠惯性转过弯去。

Analyzing crystal can be divided into plane analyzing crystal and bent analyzing crystal by shape, the bent analyzing crystal can be divided into Lorentz circle and log spiral crystal and etc.

分光晶体按其几何外形分为平晶和弯晶，其中弯晶又分为洛仑兹圆形和对数螺旋线型弯晶等。

A frown formed between her arched brows.

她皱起两道弯眉。

Based on the relation between cracking moment and yield moment of beam end section, the functions of minimum ratios of reinforcement for tension reinforcement of the beam end in positive and negative moment areas in ensuring seismic behavior of the structure are studied in this paper.

本文以梁端截面的开裂弯矩与屈服弯矩的关系为基础，分析了梁端正、负弯矩受拉钢筋最小配筋率在保证框架抗震性能中的作用。

The pipe should be bent with electric bending machine or manual pipe bender.

用电动弯管机或手动弯管器弯管.

The utility model relates to an elbow lined with fluoroplastic, which comprises an elbow and is characterized in that a layer of fluoroplastic is lined on the inner wall of the elbow.

本实用新型涉及一种内衬氟塑料弯头，包括弯头，其特征是在弯头的内壁上衬覆有一层氟塑料。

Based on the vector bender principle of the numerical pipe-bending machine, use PLC and position module to finish the design of bender's control system.

基于数控弯管机的矢量弯管原理，利用PLC和定位模块控制单元相结合的方法来实现弯管机控制系统的设计。

Multi-rigid-body Dynamic Simulation of the Bending Roller Unit of Direct-driving Stretcher Leveller The Tension leveller is used to improve strip shape and mechanical properties.

直接传动型拉伸弯曲矫直机弯曲辊系多刚体动力学仿真研究本机组采用拉伸弯曲矫直机的主要用途是改善镀锌带材板形及机械性能。

Then she bent over and gave him an eyeful of her tattoos.

接着她弯下身子，让他好好看清楚她的文身。

She bent over and unbuckled her sandals.

她弯下腰解开了凉鞋搭扣。

In this paper an expression of flexural rigidity and stress of FRP concrete composite pipe is put forward. Furthermore, the experimental verification is made with its flexural stress and deflections, measured by three point bending experiment.

本文导出玻璃钢/混凝土复合管的弯曲刚度与应力计算表达式，并以三点弯曲试验测出复合管的弯曲应力和挠度来验证。

The messenger bent and scratched at his knee where the strapping chafed.

送信人弯下腰来，挠着膝部被绑腿磨红的地方。

The bending moments and the axial forces are separately considered according to little deformation theory and the principle of superposition. Energy differential method is adopted to solve the shear lag effect of the cable-stayed bridges caused by the bending moments, where the beam-column effect is considered.

根据小变形理论和叠加原理，将弯矩和轴力作用分开处理，利用能量变分法来求解弯矩和轴力共同作用下的剪力滞效应，在分析弯矩作用时考虑了梁柱效应。

Firstly, the bending load-deflection relationship and failure modes of the test specimen were obtained by the four-point bending test.

首先进行静态四点弯曲实验，得到实验试件在静态弯曲载荷作用下弯曲载荷与加载点挠度的关系以及试件在静载作用下的破坏模式。

A small, unobtrusive smile curved the cook's thin lips.

厨师的薄唇一弯，露出一丝不易察觉的微笑。

The local hydrodynamic intensity and the bend curvature are main factors that make the transversal slope of water surface in the lower bend larger than that in the upper bend.

河口段下游弯道的水面横比降大于上游弯道，当地水动力强度和弯道曲率是其主要影响因素。

He bent down and picked up a rock.

他弯下腰捡起一块石头。

I lowered myself to the water's edge, getting my feet wet.

我弯下身子走到水边，把脚弄湿了。