feed rate的例句大全

Using AC motor speed control system directly and cutting feed rate to achieve high quality cut.

采用AC马达调速系统直接控制切割进刀及速度,以达到高品质之切条.

Effects of feed rate, feed fraction, reflux ratio and feed position on reaction distillation were investigated.

考察了进料流率, 进料组成, 回流比,进料位置对反应精馏的影响.

Research on Steady Feed Rate of SSV

逐点比较法进给速度的稳恒研究

The process variables were screw profile, feed rate, and screw speed.

本研究之加工变数为:螺丝元件组合, 进料速率及螺轴转速.

High-speed, high feed rate.

高速度 、 高进刀量钻孔.

The spindle speed, feed rate, NC program, machine switch machine time information acquisition.

实现了对主轴转速，进给速度，NC程序，机床的开关机时间的信息的采集。

Based on the designed thin film evaporator, the influence of the rotor speed, feed rate and liquid inlet temperature on evaporation length and film heat transfer coefficient was primarily discussed using the software CFX 4.4 with water as feed liquid.

针对自行设计的薄膜蒸发器，以水为物料，采用大型CFD软件CFX4.4，初步探讨了刮板转速、进料量、进料温度等参量对薄膜蒸发器蒸发段长度和加热段膜内传热系数的影响。

Two groups of matching relation of the weld speed and the wire feed rate were found in a condition of invariable laser power and focus position.

前者试验获得了一定激光功率和离焦量条件下两组焊接速度和送丝速度的匹配关系，并发现填充焊丝的加入对焊缝咬边现象确有改善；

The hardware and software structure of a CNC system for high feed rate punching ma-chine is introduced.

介绍了一种冲床高速送料数控系统的硬件和软件结构。

According to the cutting speed, feed rate, sampling frequency and time, the characteristic parameters of saw-tooth chip type and shear instability could be calculated based on the saw-tooth chip forming frequency formula supported by M.C. Shaw theory.

从切削力高频信号的切削速度、进给量、采样频率和时间可以定性描述锯齿形切屑形态和剪切失稳的特征参数，依据Shaw建立的锯齿形生成频率模型。

High feed rate CNC system for punching machine

冲床高速送料数控系统的研制

Methods include falsifying products'nutrient and overstating the feed conversion rate in order to deceive users.

其主要手段就是在饲料营养方面弄虚作假和对其饲料转化率夸大其词,以争夺客户.

Adding in the piglet feed, the survival rate is 30 percent higher, without diarrhea symptoms.

在仔猪饲料中添加成活率高出30%, 无拉稀症状出现.

Experiment results show that feed-forward backpropagation network achieves the best performance, which reduces average error rate by54.4%.

实验结果表明前馈后向传播网络的性能最好，与基准模型比较平均错误率下降54.4%。

Results have shown that, compared with adding aureomycin in feed, adding virginiamycin and aureomycin to feed can remarkably promote the growth and improve the absorption rate of feed.

结果表明：饲粮中添加维吉尼霉素+金霉素与添加金霉素相比，有显著促生长和提高饲料利用率的效果。

Design and Calculation of Rate of Boiler Blowdown Before and After Improving Feed Water Quality of Heating Supply Boiler

改善供热蒸汽锅炉给水品质前后锅炉排污率的设计计算

An auto-feeding powder apparatus with good working stability and continuous adjustment of powder flow rate has been developed for laser cladding, in which the main power of the powder motion is gravity.

研制了一种工作稳定性好、粉末流量连续可调的自动送粉装置。

We used the AEQ method based on zero-crossing rate to control acoustic feed-back. 4.

用基于过零率的AEQ方法进行声反馈控制。

The Comparison of SAB Rabbit and New Zealand Rabbit in Early Growth Rate and Feed Conversion Efficiency

德国大白兔与新西兰兔早期生长规律及饲料转化效率的比较

Comparison of Ehrlichia canis Infection Rate Between Ordinary People and People Working at Canine Feed Lot in Guangzhou Area

广州地区犬场工作人员与一般人群犬埃立克体感染的比较研究