shear of的例句大全

Research and Modal Test of Shear Connector in the Steel-Concrete Composite Segment of the 3RD Nanjing Yangtze River Bridge's Tower

南京长江三桥桥塔钢&混结合段剪力键选型试验研究

The article uses CT technology to study the radial un-uniformity of the mixture, carries out the constant height-frequency scanning test and the constant height repeating shear test to study the influence of the radial un-uniformity on the shear performance of asphalt mixture.

该文采用CT技术研究了混合料的径向非均匀性，通过恒高度频率扫描试验和恒高度重复剪切试验研究了径向非均匀性对沥青混合料抗剪能力的影响。

Investigation on Off-axis Tensile Test for Determination of Shear Characterization of Composites

偏轴拉伸测定复合材料剪切特性的研究

The relationship of the strength of the SiCw/ Al composite and off-axis angle of the SiC whisker is studied with the analysis method of the simplified stress. Investigation on Off-axis Tensile Test for Determination of Shear Characterization of Composites

用简化应力的分析方法推导了SiCw Al复合材料的强度与SiC晶须偏轴角α的关系，并通过试验进行验证.偏轴拉伸测定复合材料剪切特性的研究

Through compaction hardness and analog shear rock failure test to drilling core, the paper discusses the possibility of discriminating downhole rock type by using rock acoustic emission frequency.

通过对钻井取心岩样压入硬度及模拟剪切的破岩试验，探寻利用岩石的声发射频率来判别井下岩石类型的可能性。

Study on improved double-notch shear strength test of glass laminates

复合材料层合板双切口层间剪切试验的改进研究

Wax deposition of Xinjiang crude oil is investigated on a test loop and the following conclusion can be derived: the deposit coefficient decreases as the shear stress at the pipe wall increases incurred by the change of the temperature or velocity of tile flow.

通过对新疆的几种油样进行试验研究，结果表明，当温度或流速发生变化从而引起管壁剪切应力变化时，沉积系数随着管壁剪切应力的增大而减小。

Application of Inclined Plane Shear Test to Asphalt Mixture

斜面剪切试验在沥青混合料中的应用

After HF acid etching under 5 different HF concentrations and 6 exposing times, shear bonding strength of porcelain to enamel were tested.

选择30个氢氟酸（HF酸）浓度－时间搭配点，测试瓷贴面复合体整体粘结抗剪强度。

The influence of shear rate on cement slurry thickening time;

剪切速率对油井水泥稠化时间的影响；

Dependence of peak acceleration and peak velocity on the environment shear stress

峰值速度和加速度对环境剪应力的依赖性

Application of Large Scale Torsional Shear Apparatus on Coarse Aggregate Research

大型扭剪仪在粗粒材料研究中的应用

The formulations are based on the thermoelastic version of the theory of Whitney-Pagano laminated plate, which includes thickness shear deformations.

该模型是建立在Whitney-Pagano迭层板理论和热弹性模型基础上，考虑了沿板厚的剪切应变。

Thermoplastic Shear Instability of Corrosion-Resisting Metals in Cutting Process

耐蚀金属材料在切削过程中的热塑剪切失稳

A fully discrete finite element scheme is presented for a nonlinear time dependent problem which models the antiplane shear deformations of a thermoplastic material, and an error estimate is derived.

对一个模拟热塑性材料剪切变形的非线性瞬态问题，给出了一种全离散有限元格式，并导出相应的误差估计。

Experimental research on shear strength of basalt fiber composites reinforced by thermosetting resin

热固性树脂基玄武岩纤维复合材料性能的研究

Based on the 8-node isoparametric element of m edium/ thick plate, this paper builds up a element by means of introducing generalized con forming condition of shear strain and displacement.

在适用于中厚板的八结点等参数平板单元的基础上，通过引入剪应变与位移的广义协调条件，建立了一种平板单元。

The structure coordination and shear unlocking middle thick plate element is a problem to which people pay close attention in the finite element analysis of plate.

在板的有限元分析中，构造协调和无剪切闭锁现象的中厚板单元一直是人们所关注的问题和难题。

In the case of thin plate, this thick/ thin plate element is degraded into corresponding thin plate element automatically and is free from shear locking.

对于薄板极限情况，这种厚薄板通用单元自动退化为原有的薄板单元，完全无剪切闭锁现象发生。

Shakedown analysis of a thick-walled cylinder of elastic-perfectly plastic material is presented in terms of the twin-shear unified criterion. The unified analytical solutions of the loading stress fields, the residual stress fields and the shakedown limit pressure of the thick-walled cylinder are derived.

采用双剪统一强度准则对理想弹塑性材料的厚壁圆筒进行安定性分析，得出了厚壁圆筒加载应力、残余应力及安定极限压力的统一解析解。