shear of的例句大全

The effects of pre-notches with different radii of curvature on the self-organization of multiple adiabatic shear bands ( ASBs) in the 7075 aluminum alloy were investigated by means of the thick-walled cylinder ( TWC) technique and finite element method ( FEM) for the first time.

利用厚壁筒坍塌实验以及有限元方法，研究了不同曲率半径缺口对7075铝合金多条剪切带自组织行为的影响。

The limit loading formulae of thick-walled tube with differential strength in tension and compression are derived in the twin shear unified strength theory under the combined actions of both an inner pressure and axial force.

应用双剪统一强度理论，考虑材料的拉压异性和同性，推导了在内压和轴力联合作用下的厚壁圆筒的塑性极限载荷表达式。

The expressions of hydrostatic force and viscous dissipative force were employed to clarify the relationship between the hole disappearance phenomen and shear thickening effect.

提出了基于流体动力学的简化模型，利用静水压力和粘性耗散力的表达式阐明了初始扰动的消失和剪切增稠效应的关系。

The polymer solution was manifested to show the property of shear thinning at low flow rate and shear thickening if the flow rate exceeded a point.

实验发现聚合物溶液在低流速下，表现剪切变稀，超过一定流速后，表现为剪切增稠。有效粘度和弹性粘度随着剪切速率和疏水基含量的增大而增大。

The results indicated: Shear stress, tensile stress and springiness may be employed to assess the texture quality of noodles which have big width coefficient of variation and relatively small thickness coefficient of variation.

结果表明，在面条宽度变异系数较大、厚度变异系数相对较小的情况下，剪切应力、拉断应力和弹性，可用于面条质构品质的评价；

The influences of casing length, casing thickness, frictional coefficient and interference value on contact pressure, frictional shear traction are analyzed.

通过分布加载和改变相关参数的方法，分析套管长度、套管厚度、摩擦因数以及过盈量对接触压力、摩擦剪切力等影响规律。

The limitation of web depth-thickness ratio and shear resistance of portal frame tapered girder

门式刚架变截面楔形梁腹板高厚比的限值及抗剪承载力

Thickness Shear Vibration of Piezoelectric Ceramic Thin Discs

压电陶瓷薄圆片振子的厚度剪切振动

In this paper, thickness shear vibration or torsional vibration of piezoelectric ceramic thin discs waw studied.

本文研究了切向极化医电陶瓷簿圆片的厚度剪切振动，即扭转振动。

Research of Temperature Distributing at Shear Thinning Considered under Thin Film Lubrication

薄膜润滑条件下考虑剪切稀化时温度分布的研究

Characteristic Analysis of Thin Film Lubrication at Shear Thinning

剪切稀化时薄膜润滑特性分析

The critical load of elastic buckling for shear wall composed of thin steel plate and reinforced concrete frame

钢筋混凝土薄钢板组合剪力墙的弹性屈曲临界荷载

Case Study for "Interlocking Tooth" and "Fash" of Thin Steel Plate after Cutting with Single Shaft Driven Double Side Robbing Shear

单轴传动滚切式双边剪薄钢板剪后错牙及飞边的原因分析与对策

Discussing on Calculation Method of Concrete Shear Resistance in Thin Webbed Girder of RC

钢筋砼薄腹梁中砼抗剪承载力计算的探讨

Theoretical Analysis and Experimental Study on Shear Bearing Capacity of T Formed Thin Webbed Girder for Reinforced Concrete

钢筋混凝土T形薄腹梁抗剪承载力的理论分析及试验研究

Distortion of thin-walled bar with rectangular section taking account of shear deformation

考虑剪切变形的矩形截面薄壁杆件畸变分析

Using the continum assumptions, lateral resisting structures of the skew combined structures are simplified as a model of thin-walled bar considering torsional deformation, bending deformation and shear deformation.

通过连续化假定，将斜交结构的抗侧力结构简化为同时考虑扭转、弯曲、剪切变形的薄壁杆件计算模型，更能反映建筑结构的实际受力。

Thin-walled structure analysis with consideration of post buckling behaviour of composite shear panels

计及复合材料受剪板后屈曲的薄壁结构分析

In this paper, a method of analysing thin-walled structure with post-buckled composite shear panels is proposed.

本文提出了一种具有后屈曲复合材料受剪板的薄壁结构分析方法。

The rheological investigation indicates that the slurry pumped with SAF is pseudoplastic fluid, has remarkable characteristic of thixotropic property, and the excellent anti-shearing quality of the slurry is proved under the constant shearing rate of 100 s~ (-1).

流变性实验研究发现，浆体属于假塑性流体，具有明显的触变性，并且浆体在100s-1的固定剪切速率下剪切具有较好的抗剪切性。