stress element的例句大全

Calculated unit rotor's temperature and thermal stress in finite element analysis

有限元分析法计算汽轮机转子温度应力场

Nonlinear Finite Element Analysis of the Thermal Stress of the Train Wheels

火车车轮非线性有限元热应力分析

Finite element analysis of thermal stress in transition section of coke tower

焦炭塔过渡段区域的热应力有限元分析

Three-dimension model on thermal-stress coupling analysis is performed according to the material features and working environment of the cooling pipe in Zn liquid, using the large-scale finite element analysis software ANSYS.

针对锌液冷却管材料特性和工作环境，利用ANSYS有限元分析软件建立了冷却管的温度应力耦合分析的三维有限元模型。

By using of the finite element method, this paper has analyzed the bending stress of the circular arc toothed gear used in fewer teeth difference transmission composed of circular arc toothed gear and pin gear, and verified the result with electrometry test.

利用有限元法，对圆弧针齿少齿差传动机构中的行星轮&圆弧齿轮的弯曲应力分布作了分析，并用电测实验进行了验证。

By means of finite element method, this paper carried out a statics analysis on the complete appliance of three-ring reducer. The reacting force of each structural member and the variation law of Von Mises stress were obtained during one period running of the three-ring reducer.

通过有限单元法，对三环减速器的整机进行了静力学分析，得到了三环减速器运转一个周期时，各个构件的作用反力和VON MISES应力变化规律。

Stress Analysis of Part of Reaction Vessel with Finite Element Program

反应釜局部结构的有限元应力分析

The finite element method is applied to analysis and optimize the design of the hydrogenation reactor skirt support area, and stress of the risk section is assessed and strength is checked.

采用有限元法对加氢反应器裙座支撑区进行有限元分析及优化设计，并对其危险截面作应力评定和强度校核。

Analysis on Thermal Stress on Flat Steel Ingot Mould by Finite Element and Thermal Photoelastic Method

采用有限元和热光弹方法分析扁形钢锭模的热应力

The stability of the base structure for the fracture rock-mass of great stress area in Jinchuan lean ore area mining by natural caving process is analyzed by the three-dimensional elastic-plasticity finite element numerical analogy.

采用三维有限元弹塑性数值模拟方法，分析金川贫矿区高应力破碎岩体自然崩落法开采过程中底部结构的稳定性。

Finite element analysis and calculation of stress for stamped tee is carried out.

文章对等径挤压三通进行了三维有限元计算和分析，找出其在内压作用下的应力分布规律，并用实验加以验证；

Finite element stress analysis of Yankee dryer

大烘缸的有限元法应力分析

Three dimensionally reconstructed models of human abdominal aortic aneurysm: finite element analysis of wall stress distribution

人类腹主动脉瘤三维模型的有限元应力分析

Finite element analysis of transient thermal stress during cryosurgery

低温手术过程组织瞬态热应力有限元分析

Stress distribution of the spine in upright, flexion and extension postion was analyzed using a three-dimensional finite element model of the spinal motion segment.

本研究采用脊柱活动节段的三维有限元模型分析了脊柱在直立位、前屈位和后伸位的应力分布情况。

By finite element method ( FEM), the structure of composites flywheel rotor is studied in this paper, the stress and strain in a spinning rotor is analyzed by FEM and an optimization method of the flywheel rotor structure is put forward.

采用有限元数值分析，分析了复合材料飞轮内部应力及应变，并结合复合材料缠绕成型工艺，提出一种新的复合材料飞轮分层结构。

Stress finite element analysis and fatigue life estimate of the inner spiral flight in new type reactor

新型反应釜釜内螺旋叶片强度分析与疲劳寿命预测

Studying the stress distribution of the spiral case, reinforcement and cracking development of surrounding concrete by means of 3-D non-linear finite element analysis, in order to obtain a feasible reinforcement amount and arrangement.

根据选定的充水保压值，对蜗壳和外围钢筋混凝土进行非线性分析，对外围混凝土裂缝发展、蜗壳和钢筋的应力分布进行研究，确定合理的混凝土配筋参数；

Finite element analysis of elastic stress and the resolve shear stress in the primary slip system of a copper TRICRYSTAL

铜三晶体弹性应力场和主滑移系分解切应力的有限元分析

Finite element simulation of laser-controlled thermal stress separation of soda-lime glass plate

钠钙玻璃板激光热应力切割过程的有限元仿真