stress model的例句大全

The relaxations of stress of PTT fibre and PET fibre may be simulated by using a three-element mechanical model.

三元件模型能较好地模拟PTT纤维和PET纤维的应力松弛过程。

The characteristics of pressure distribution between rolls of HC mill and the variation regulations of the pressure distribution with axial displacement of middle roll have been calculated and analyzed by influence function method and elasticity basic beam model, and verified by three-dimensional photoelasticity stress analyzing test.

应用影响函数法和弹性基础梁模型计算分析了HC轧机的辊间压力分布的特性以及中间辊抽动时辊间压力分布的变化规律，并用三维光弹性应力分析法进行了实验论证。

At the same time the paper establishes the solid finite element model of T-beam, and analyses the fatigue cracks, and the time-stress history of the reinforcement in tensile region and of the concrete in compressive zone under automobile load spectrum.

同时建立了T型梁有限元实体模型，分析了车辆荷载谱作用下梁的疲劳开裂、压区混凝土以及拉区钢筋的应力时间历程等问题。

A new model and new theoretical system of yield and failure of materials under the complex stress state

复杂应力状态下材料屈服和破坏的一个新模型及其系列理论

By creating two kinds of stress environment in the same animal model, we performed a three-point bending test and a compressing test on the rat femurs growing under different stress conditions to characterize the effect of stress on bone mechanical properties.

在同一动物个体中创造两种应力环境，对不同受力条件下生长的大鼠股骨进行三点弯曲试验和压缩试验，研究应力对骨力学性能的影响。

According to the wall testing process, we put finite element numerical simulation on the cavity wall which is set the ring beam but without structural concrete column, using discrete model to analysis the principal stress, cracks distribution and displacement of the wall.

参照墙体试验过程，对设置圈梁但无混凝土构造柱的空斗墙体进行有限元数值模拟，采用分离式模型对墙体的主应力、裂缝分布与墙顶位移变化进行分析。

In this dissertation, resorting to the model of thrust ball bearing, the effect of material characteristic on the distribution of rolling contact stress field about super hard material are simulated by utilizing commercialized software ANSYS.

本文应用大型有限元通用软件ANSYS作为分析工具，以推力球轴承为模型，借助于数值模拟技术研究了超硬涂层材料滚动接触行为，分析了材料特性对轴承滚动接触应力场的影响。

A random process model of structural functional function of components attached to vectoring thrust nozzle was employed, in which strength and stress of components were respectively taken as random variable and stochastic process.

本文将矢量喷管构件的强度考虑为随机变量，将构件的应力考虑为随机过程，建立了构件结构功能函数的随机过程模型。

Pre-stress Loss Static& Dynamic Analysis of a Concrete Filled Steel Tube Tied Arch Bridge Model

钢管混凝土系杆拱桥模型的预应力损失静动力分析

The mathematic expressions of temperature stress and dry shrinkage stress are deduced. The time-varying model based on multiple factors of concrete face stress is established.

推导了温度应力分量和收缩应力分量的数学表达式，建立了面板应力多因素时变分析模型；

The establishment of the numerical simulation of material model for tin bronze alloys equal channel angular pressing, analysis process of metal flow, temperature distribution and stress distribution, impact of friction coefficient, dead zones were also discussed. 3.

建立锡青铜等通道弯角挤压的数值模拟材料模型，对金属流动过程、温度分布、等效应力分布等进行了分析，对摩擦系数、死区的影响进行了讨论。

In addition, the modified model not only can be used to describe the stress strain response at different strain rates very well, but also can be applied to predict the highly rate dependent multiaxial ratcheting behavior of eutectic tin-lead solder.

同时，修正后的模型不仅能准确描述锡铅钎料在不同应变率下的应力应变滞环，还可以较好的预测材料多轴棘轮效应的率相关性。

The paper takes Dongjiang Fourth Bridge in Huizhou city as an example for searching for the influence of Pre-stressed strand arrangement on the craze of box girder. By using great Finite-Element analysis ANSYS special part model of box girder have been built up through adopting three-dimensional body element.

为了探求预应力的布置对箱梁开裂的影响，以惠州市东江四桥为例，利用大型有限元程序ANSYS，采用三维体单元建立箱梁节段空间局部模型。

Above all, the original model has been supported mostly, and demology factors and organizational factors play a role on the role stress, job burnout and organizational commitment.

通过实证分析得出，本研究建立初始模型的大多数路径得到了支持，人口学变量、组织变量对角色压力、工作倦怠和组织承诺存在显著性差异。

Measuring Stress in the Ground Pressure Model by the Strain Gauge

矿山地压相似材料模型应力测量的应变砖法

This paper makes an attempt to establish a new model for marking sentence stress more scientifically and more precisely, in the light of the English phonological compound stress rule and the phrase stress rule.

本文试图运用TG理论音位学中复合词重音规则和短语重音规则，建立一种简便易懂而又科学准确的句子重音标立模式。

Based on the theory of stress waves, the three dimensional distribution of the stress wave energy is calculated from the model. With the aid of the index of specific surface energy, the blasting fragmentation distribution of the isotropic and elastic rock can be obtained.

模型根据应力波理论，计算出应力波能量的三维分布，以岩石破碎单位表面能指标作纽带，首先求算出均质连续弹性台阶岩体的爆破块度分布。

Thermal action is a kind of geological force similar to stress and gravity. thirdly, setting up the more real geological model trough history match.

热力作用是与应力、重力相类同的一类地质作用力。建立地质模型；

Investigation on the mathematic model of thermal boundary resistance for thin-film high-T_c superconductors based on the peeling stress

基于热应力的高温超导薄膜界面热阻模型研究

The validity of the tibia segment model was evaluated against three point bending test in terms of tibia stress.

胫骨模型由胫骨三点弯曲应力分析实验验证。