stress model的例句大全

Thus in this paper a two-dimension thermal elasto-plastic and creep stress ( TEPC) model for thin slab strand is developed.

针对这一目的，文中建立了薄板坯连铸二维热弹塑性蠕变应力（TEPC）模型。

Analyzed several lamp thermal defect in detail, especially resulted from thermal stress, the thermal transmission model is simplified based on fast model used, then it is discussed. ( 2) Researching the critical technique of computing the thermal field.

详细分析了车灯的几个常见热缺陷，特别是热应力引起的缺陷，并在现有的快速模型的基础上简化车灯传热模型，讨论了热源建模。（2）车灯温度场计算关键技术研究。

Using the cross model modified and MATLAB software, the composites modulus and stress on a fiber section at tensile load are calculated.

由修正后的交叉模型应用MATLAB计算了三维编织复合材料的弹性模量和拉伸载荷下纤维束截面的应力情况。

This paper has got the initial stress field and boundary conditions. On this basis, the overall planar elastic-plastic finite element model of the underground caverns was established by ADINA ( a finite element program for automatic dynamic incremental nonlinear analysis).

本文在确定了厂房区的初始应力场和边界条件的基础上，应用ADINA自动动态增量非线性有限元程序对思林水电站地下洞室群建立了平面弹塑性有限元计算模型。

From the analysis, the degree of impact on model test by the earthquake is about 23.8% to the deflection and about 24.0% to the first principal stress and about 23.3% to the third principal stress.

由数值计算分析得到地震荷载对模型试验成果的影响程度：对变位的影响约为23.8%，对主拉应力的影响程度约为24.0%，对主压应力的影响程度约为23.3%。

Based on the parameters of mechanical behavior under tensile and creep tests, the model of constitutive equation of stress-strain under the thermo-mechanical fatigue has been established.

基于简单试验条件下测得的单调拉伸性能参数，同时考虑应变、温度和应力对热机械疲劳应力应变关系的影响因素，建立了热机械疲劳应力应变本构关系模型。

If the loaded flat extrusion container is predigested as a model of a infinite plane with a ellipse hole in the center, the maximum theoretical stress is quite closed to that measured from the experiment.

如果把扁挤压筒的受力模型简化成中间带椭圆孔的无限大平面的弹性力学模型，理论最大应力值与实验结果比较接近。

Residual stress analysis in unsymmetrical laminated ceramics by non-uniform strain model

非均匀应变模型分析非对称层状陶瓷的残余应力

The response-displacement method and thin circular cylindrical shell finite element model are used for the analysis of earthquake stress at the T-joint of buried pipes. The numerical results are in good agreement with the experimental results, and some useful conclusions are obtained.

采用反应位移法和圆柱薄壳有限元模型对地下管道三通地震应力进行了分折.计算结果与实验结果吻合较好，得出了一些有益的结论。

Based on the numerical simulation result of convective heat transfer, the finite element calculating model of the integrate jacket structure of the cylinder of a thin film evaporator was established, the stress analysis and the intensity calculation of the structure were made using the finite element method.

根据对流传热数值模拟结果，建立了薄膜蒸发器筒节整体夹套结构的有限元计算模型，利用有限单元法进行了结构的应力分析和强度计算。

Finite element analysis of head/ disk continuous sliding contact was performed to investigate temperature field and thermal stress field due to frictional heat using an axisymmetric thermal model. Characteristic temperature rise with sufficient sliding time was exhibited.

采用二维轴对称有限元模型计算磁头/磁盘滑动接触下，铝质磁盘的稳态温度和热应力场以及热退磁临界条件。

A Math physical Model of Thermal Elastic plastic Stress Simulation of Ingot Mould in the Casting Ingot

钢锭模在铸锭过程中热弹塑性应力数值模拟的数理模型

He proposed a model of stress reaction in the body.

他提出了一个人体内应激反应的模型。

Model and stress of vocation school's Chinese reading lesson

职校语文阅读教学的重心和模式

The anti-seismic analysis is carried out for dry-type air-core reactor. The calculation basis and mathematic model are given. The basic natural vibration period, seismic stress and the calculating formula for safety-check are all presented here.

对干式空心电抗器总称结构进行了地震分析，提出了计算依据与数学模型，给出了基本自振周期、地震力以及安全校核的实用计算公式。

The ameliorated model can reflect the stress-strain relation of soft clay of structure cy better.

修正后的模型能够更好的反映结构性软土的应力&应变关系。

Establishment of A Rabbit Stress Fracture Model Diagnosed by ECT

用ECT诊断法建立兔应力性骨折实验模型

Based on compress experiment of coal cleat, mathematical model between stress and cleat width was erected.

基于煤割理压缩实验，建立了应力与割理宽度之间的数学模型。

The model for the 3D Initial Geo-stress Field is build.

建立初始应力场回归模型，以回归精度为目标函数，优化基本因素组合。

The frame-characters and odditional internal stress under anchor force are studied and calculated basing centrifugal model experiments and field tests.

通过现场试验与离心模型试验相结合，对锚索框架的受力模式进行了研究；