working temperature的例句大全

Preferences of the Main Working Parameters of the Auto-heating System for Constant Temperature in Biogas Digester

沼气反应器中自动加热恒温系统主要工作部件的参数选择

The results reveal that the copper sheets are manufactured by using the technology of hot-forging, and temperature range of hot-forging is 500~ 700 ℃. The working process is consonant with the modern metallurgical principle.

结果表明，铜片为高温热锻成形，其热锻温度范围在500-700℃之间，符合现代金属学原理。

The working principle of a novel optical fiber temperature sensor with metal coating is analyzed.

介绍一种新型的金属敷层刻纹光纤温度传感器，对其测温原理进行了研究。

while the optimum working conditions found for saccharification are: saccharifying temperature 58 ℃, ph 4.5, saccharifying time 2.5 h, saccharifying enzyme added 0.3 g/ 100 g corn meal.

最佳糖化工艺条件为糖化温度58℃，pH值4.5，糖化时间2.5h，糖化酶的添加量0.3g/100g玉米粉。

? Analyzed the stress distribution under the common act of the environment temperature, inertia force and shrink fit when the rotor was working.

转子工作时，在环境温度、惯性力及过盈配合等多种因素的共同作用下，分析了转子的应力分布。

In this paper, using the gelling agent synthesized by myself as host agent, two sets of working liquids that meet the acid and frac treatment in deep wells with high temperature have been developed: the jell acid system and low solidoid gelling acid system.

本文以自己合成的胶凝剂为主剂，研制了两套适应高温、深井酸压改造的工作液体系，即高温冻胶酸体系和高温低固相胶凝酸体系。

Relations between rectal temperature and skin temperature of men in gas protective clothing during working under hot environment

高温下身着防毒服作业时肛温与皮温的关系

Serve wine at normal room temperature; normal diplomatic relations; normal working hours; normal word order; normal curiosity; the normal course of events.

标准室温下款待美酒；正常外交关系；正常工作时间；正常词序；正常的好奇心；事件的正常发展。

In the manufacturing process of synthetic diamond, pressure and temperature in the working cavity of the belt-type apparatus are two critical factors that impact the product quality.

在人造金刚石合成工艺中，两面顶模具合成腔体内的压力和温度起着至关重要的作用。

In order to prolong working life of the lining sleeve for the blast furnace tuyere, the corrosion mechanism of lining sleeve was studied by the methods of SEM, XRD and oxidation at high temperature.

为了延长高炉风口衬套的使用寿命，采用SEM，XRD和实验手段，研究宝钢现用风口衬套的侵蚀机理。

The relationships between salinity, refractive index and temperature of four available working materials of solar ponds

四种太阳池工质的浓度与折射率和温度的关系

After improving, the surface temperature of tape drum dropped, the machine efficiency, the quality of filter rod and working life of the parts were increased.

改进后降低了布带轮组的表面温度，提升了滤棒质量和零件的使用寿命。

However the high temperature and flow stress make the hot working very difficult.

而钛合金热变形温度高、流动应力大，给钛合金热加工带来很大困难。

Capillary Pumped Loops ( CPLs) and Loop Heat Pipes ( LHPs) are two-phase heat transport devices which utilize the capillary forces developed in evaporator wick to drive the working fluid. They are capable of transferring large heat loads over long distances with small temperature differentials.

毛细泵回路（CPLs）和环路热管（LHPs）是一类两相热传递装置，它利用蒸发器中毛细芯的毛细力驱动工质流动，具有传输距离远，传输功率大，温差小等特点。

When choosing the high and low temperature, the present working state is indicated by the voice prompt and indicator lights.

同时，在进行高、低温选择时，还通过语音提示或指示灯提示目前的工作状态。

The paper introduces the structure and working principle of surface acoustic wave sensors, discusses its applications on temperature, pressure, gas measurement, gives the design of the equivalent circuit parameters for surfact acoustic wave sensors.

介绍了声表面波传感器的结构及工作原理，及在压力、温度、气体测量中的应用，讨论了器件等效电路的参数设计。

Four kinds of phenomena in moderate and high temperature heat pumps are found, which those are clear difference between theory and experiments, for example, the COP may be reduced with condensation temperature drop or working frequency of compressor decreasing.

在对中高温热泵进行了大量的试验研究之后，发现了四种有别于理论分析结果的试验现象，如冷凝温度下降，COP也下降；

Fourthly, in temperature monitoring module, it introduced PWM speed control technology and PID control algorithm for the fan speed control of PEMFC, which can always maintain the best working condition, and ensure the output of fuel cell high-performance.

第四，在温度监控模块中引入了PWM调速技术和PID控制算法对燃料电池的风扇转速进行控制，使燃料电池始终保持在最佳工作状态上，确保燃料电池的高性能输出。

The system real-time displays steam drum pressure, fuel oil temperature and water level, switch valve, knob and button can be operated, indicator light shows the corresponding working condition.

系统中实时显示汽包压力、锅炉燃油温度、锅炉水位的值，开关阀、按钮、旋钮都可进行操作，指示灯显示相应的工作状态。

This paper presents a tong type ammeter with DC digits involving the working principle of the Hall element used as a measuring element and describes a compensating technique for its sensitivity, input impedance and output impedance disturbed by the ambient temperature.

文中介绍了直流数字钳形电流表使用霍尔元件作为测量元件的原理以及霍尔元件的灵敏度、输入阻抗、输出阻抗受环境温度扰动的补偿方法。